Solder Wires to Pin 3 and Pin 2 on the Feather Board.
Connect the Pin 3 wire to SCL and the Pin 2 wire to SDA on the Accelerometer.
Remember those two header pins we put on a while ago? Now let's solder the 3V and GND pins from the Accelerometer onto the header pins on the 3V and GND pins of the Feather Board.
This guide was first published on Jun 05, 2019. It was last updated on Jun 05, 2019.
This page (Accelerometer) was last updated on Nov 22, 2021.
Text editor powered by tinymce.