Adafruit Metro M4 Airlift Lite dev board with SAMD51 an ESP32 Wifi Co-processor.
Featured
Give your next project a lift with AirLift - our witty name for the ESP32 co-processor that graces this Metro M4. You already know about the Adafruit Metro M4 featuring the Microchip ATSAMD51, with it's 120MHz Cortex M4 with...
view other guides that use this product
$34.95 each
In Stock
Adafruit RGB Matrix Shield for Arduino connected to a LED Matrix that reads "Adafruit Industries LED MATIX! 32x64 *RGB*"
Featured
Our RGB matrices are dazzling, with their hundreds or even thousands of individual RGB LEDs. Compared to NeoPixels, they've got great density, power usage and the price-per-LED can't be beat. But...(isn't there always a but?) You need to use our special library to...
view other guides that use this product
$5.95 each
In Stock
Two white hands hold out an assembled and powered on 64x32 RGB LED Matrix Panel - 4mm pitch. The matrix displays "Adafruit Industries LED MATRIX! 32x64 *RGB*"
Featured
Bring a little bit of Times Square into your home with this sweet 64 x 32 square RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of busses and bus stops, to display animations or short video clips. We thought they looked...
view other guides that use this product
Out of Stock
Angled shot of 5V 4A switching power supply brick with power cable.
Featured
Need a lot of 5V power? This switching supply gives a clean regulated 5V output at up to 4 Amps (4000mA). 110 or 240 input, so it works in any country. The plugs are "US 2-prong" style so you may need a plug adapter, but you can pick one up at any hardware store for $1 or so,...
$14.95 each
In Stock
pile of 50 Brass Heat-Set Inserts for Plastic - M3 x 3mm.
Featured
Wanna improve the connection strength between your project's 3D-printed parts, and also have nice clean surfaces? Instead of gluing bits together, or screwing plastic screws directly into your 3D prints, use strong and reusable machine screws and heat-set inserts. Heat set inserts are only...
$5.95 each
In Stock
Heat-Set Insert tool For Soldering Irons #4-40 / M3 Inserts.
Featured
Wanna improve the connection strength between your project's 3D-printed parts, and also have nice clean surfaces? Instead of gluing bits together, or screwing plastic screws directly into your 3D prints, use strong and reusable machine screws and heat-set inserts. Heat set inserts are only...
No Longer Stocked