Demo Video of the Adafruit TMC2209 Stepper Motor Driver Breakout Board.
Stepper motors are used for CNC machines, 3D printers, and whenever else one needs precise, powerful motion. But to get good behavior from steppers you need a motor driver chip that...
guides with product
Out of Stock
Angled shot of short black microcontroller.
A wild Kee Boar appears! It’s a shiny KB2040! An Arduino Pro Micro-shaped board for Keebs with RP2040. (#keeblife 4 evah) A lot of folks like using Adafruit...
guides with product
$8.95
In Stock
MPM3610 5V Buck Converter Breakout Board
This little buck converter based on the MPM3610 is a marvel, taking up to 21V input and providing a 5V output with up to 1.2A current. It's great for supplying power to popular 5V...
$6.95
In Stock
Monochrome 1.3" OLED module with Adafruit logos falling like snow
These displays are small, only about 1.3" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels,...
guides with product
$19.95
In Stock
Angled Shot of the I2C Stemma QT Rotary Encoder Breakout with Encoder.
Rotary encoders are soooo much fun! Twist em this way, then twist them that way. Unlike potentiometers, they go all the way around and often have little detents for tactile feedback....
$7.95
In Stock
Top view video of a Black hand turning the knob on the adjustable power supply.
Put your Snap! cassette on and sing along to "I got the power!" with this super useful power supply adapter where...
$17.50
In Stock
Angled shot of JST SH 4-Pin Cable - 200mm Long.
This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of...
Out of Stock
Angled of of JST SH 4-Pin Cable.
This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but...
Out of Stock
Panel Mount 2.1mm DC barrel jack
This power jack is designed to easily attach to a panel up to 8mm thick (0.315" or 5/16") and fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector...
$2.95
In Stock
Angled Shot of the Little Rubber Bumper Feet - Pack of 4
Keep your electronics from going barefoot, give them little rubber feet! These small sticky bumpers are our favorite accessory for any electronic kit or device. They are sticky, but...
$0.95
In Stock
Silicone Cover Stranded-Core Wire - 25ft 26AWG - Red
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire...
$4.95
In Stock
Angle shot Silicone Cover Stranded-Core Wire - 25ft 26AWG - Blue
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire...
$4.95
In Stock
Silicone Cover Stranded-Core Wire - 25ft 26AWG - Black
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire...
$4.95
In Stock
Silicone Cover Stranded-Core Wire - 25ft 26AWG - White
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire...
$4.95
In Stock
Silicone Cover Stranded-Core Wire - 25ft 26AWG - Green
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire...
$4.95
In Stock
Silicone Cover Stranded-Core Wire - 25ft 26AWG - Orange
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire...
$4.95
In Stock
Black Nylon Screw and Stand-off Set with M2.5 Threads, kit box
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker...
guides with product
$16.95
In Stock