Organize projects with these modular Lego base plates for STEMMA boards! These 3d printed holders feature built-in standoffs for press fitting the PCBs. 

It’s a nice way to secure them without screws or adhesives.

STEMMA board and sensors allow you to plug-and-play together various devices and accessories, without any soldering!

In this project, we'll build Lego base plates for all of our STEMMA boards! We designed several different sizes to to fit all of our boards!

On the bottom are tubes that are designed to fit onto LEGO compatible bricks.

The clearance in between the PCB and holder allow space for components on the bottom of the PCB.

We also designed lego plates for a couple of components like Feather boards, battery pockets and a slide switch.

All of the base plates print will out any supports and the built-in pegs allow board to simply snap to place without any additional hardware.

Parts

The VL53L0X is a Time of Flight distance sensor like no other you've used! The sensor contains a very tiny invisible laser source, and a...
$14.95
In Stock
A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing 128x64 OLED: it adds a gorgeous 128x64 monochrome OLED plus 3...
$14.95
In Stock
This is the FeatherWing Doubler - a prototyping add-on and more for all Feather boards. This is similar to our
$7.50
In Stock
It's what you've been waiting for, the Feather M4 Express featuring ATSAMD51. This Feather is fast like a swift, smart like an owl, strong like a ox-bird (it's half ox,...
$22.95
In Stock
Looking beyond ABS? Tired of PLA? Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated...
$29.95
In Stock

This guide was first published on Sep 09, 2020. It was last updated on Sep 09, 2020.

This page (Overview) was last updated on Sep 17, 2020.