This is an intermediate level project that involves soldering, as well as some simple sewing skills. It's always suggested to test your parts on a breadboard first. You'll need:
- Adafruit Pro Trinket 5V Microcontroller
- USB A/Micro B Cable (fabric one or regular fine)
- Monochrome 1.3" 128x64 OLED Graphic Display
- Lithium Ion Polymer Battery 3.7v 100mAh
- JST-PH Battery Ext. Cable
- Silicone Stranded Wire 30AWG Assorted
- Breadboard (helpful, but not required)
- Breadboard Wires (helpful, but not required)
- Alligator Clips (helpful, but not required)
- Oval jewelry setting w/open back (check Art-i-Cake brand or steampunk section at craft store)
- Large jump ring (for ribbon)
- Small jump ring (for oval setting)
- Approx. 1.5 yards of 7/8" grosgrain ribbon
- A piece of adhesive felt to form a matte
- Wire Strippers
- Flush Diaganol Cutters
- Soldering Iron (small tip helpful)
- Drill (for creating mounting hole in pendant)
- Hot glue gun
- Scissors
- Rubbing alcohol
- Cotton swab
- Jewelry glue (metal to glass like Alene's)
- Thread to match ribbon color
- Sewing machine (or needle for hand sewing)
Make sure you get up-to-speed with these helpful guides:
