CAD Assembly
The Feather is secured to the stand using two M2.5 x 10mm long standoffs, two M2 x 10mm long standoffs, four M2.5 x 6mm screws and four M2 x 6mm screws.
Build Volume
The parts require a 3D printer with a minimum build volume.
- 50mm (X) x 50mm (Y) x 68mm (Z)
Slice Settings
Use your preferred slice settings for your choose of filament.
It is suggested to use a brim for best build plate adhesion. A brim adds a single layer flat area around the base of the part to prevent warping.
CAD File
STL file for 3D printing is oriented to print "as-is" on FDM style machines. The part is designed to 3D print without any support material with PLA filament. Original design source may be downloaded using the links below
Design Source Files
The project assembly was designed in Fusion 360. This can be downloaded in different formats like STEP, STL and more. Electronic components like Adafruit's boards, displays, connectors and more can be downloaded from the Adafruit CAD parts GitHub Repo.
Page last edited March 08, 2024
Text editor powered by tinymce.
