3D Printed Stand

Prop up your Feather ESP32-S2 Reverse TFT with a 3D printed stand! Just what you need for displaying that IoT project you've been hackin' on.

Accessible Features

Use nylon hardware screws and standoffs to secure the Feather to the 3D printed stand. A large opening in the back allows access for STEMMA QT sensor breakouts and other add-ons.

Parts

Video of a rectangular microcontroller with a TFT display. A pink manicured finger presses each of the tactile buttons, which are recognized on the TFT display.
Like Missy Elliot, we like to "put our [Feather] down, flip it and reverse it" and that's exactly what...
Out of Stock
Overhead shot of a coiled, one-meter-long black woven USB-A to USB-C charging cable with three magnetic tips.
Some days we're feeling extra fancy here at the 'fruit warehouse, and we have a big soft spot for woven fabric cables. Like, peep 
$12.50
In Stock
Black Nylon Screw and Stand-off Set with M2.5 Threads, kit box
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker...
$16.95
In Stock
1 x M2 Hardware Kit
M2 Nylon Hardware Assortment Kit

This guide was first published on Feb 14, 2023. It was last updated on Feb 14, 2023.

This page (Overview) was last updated on Feb 14, 2023.

Text editor powered by tinymce.