Build a stained glass inspired lamp with tap and Bluetooth controls.
Use translucent filament to give the shades a stained glass effect.
This project features light meter mode, audio reactivity and colors and animations.
Tap detect is used to cycle through color modes, or use the Adafruit Bluefruit Connect app to adjust the brightness.
The Circuit Playground Bluefruit has many built-in sensors including light, temperature, accelerometer and microphone.
In light meter mode, as the light levels decrease, the lamp brightness to a red color. When light levels rise, the lamp switches to daylight colors.
The PDM microphone is used for the audio reaction mode to display sound levels.
Circuit Playground Bluefruit is our third board in the Circuit Playground series, another step towards a perfect introduction to electronics and programming. We've...
guides with product
Out of Stock
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0, but with a twist! Literally! Instead of the cable coming straight out from the connector, there's a right...
$4.95
In Stock
Our 5V 2A USB power adapter is the perfect choice for powering single-board computers like Raspberry Pi, BeagleBone, or anything else that's power-hungry!This adapter was...
$7.95
In Stock
7 x
M3X6mm Screws
M3X6mm Screws
3 x
M3 nuts
M3 nuts
1 x
M3x5mm screws
M3x5mm screws
8 x
M2x6mm screws
M2x6mm screws
Page last edited February 17, 2026
Text editor powered by tinymce.
