NeoMatrix Square Pixels

Build a square pixel display with Adafruit's 8x8 NeoMatrix and Feather M4. Use Black LED acrylic and 3D printed grid to create an evenly diffused LED effect. Electronics are housed in an elegant looking snap fit case with built-in on/off switch. LED animations are easily customizable with CircuitPython.


Angled shot of a Adafruit Feather M4 Express.
It's what you've been waiting for, the Feather M4 Express featuring ATSAMD51. This Feather is fast like a swift, smart like an owl, strong like a ox-bird (it's half ox,...
In Stock
LED RGB matrix 12" x 12" with "Adafruit Industries LED Matrix" text showing, and LED acrylic slowly covering to make it nicely diffused
A nice whoppin' slab of some lovely black acrylic to add some extra diffusion to your LED Matrix project. This material is 2.6mm (0.1") thick and is made of special cast...
In Stock
Adafruit NeoPixel NeoMatrix 8x8 - 64 RGB LED Pixel Matrix lit up rainbow
Put on your sunglasses before wiring up this LED matrix - 64 eye-blistering RGB LEDs adorn the NeoMatrix for a blast of configurable color. Arranged in an 8x8 matrix, each pixel is...
In Stock
Prototyping feather wing PCB with loose headers
A Feather board without ambition is a Feather board without FeatherWings!This is the FeatherWing Proto - a prototyping add-on for all Feather boards. Using our...
In Stock
1 x 1200mAh Battery
3.7V Lipo Battery
1 x Slide Switch
Slide Switch
1 x Header Kit for Feathers
12-pin and 16-pin Female Headers
1 x 10-Wire Ribbon Cable
28AWG Silicone Cover Stranded Core
1 x JST PH 3-Pin Socket
Color Coded Cable - 200mm
1 x M2.5 Hardware Kit
Black Nylon Screw and Stand-off Set
1 x USB Cable
Fully Reversible Pink/Purple USB A to micro B Cable - 1m

This guide was first published on Aug 18, 2020. It was last updated on Nov 29, 2023.

This page (Overview) was last updated on Aug 14, 2020.

Text editor powered by tinymce.