Cut Shapes 

Download and cut the parts out with scissors or use a cutting machine. The svg files are arranged in layers, so its easy to set up!  

We used card stock (210gsm) for the black and white colors. 

The help stiffen the skull and wrench parts, we used a 1.6mm thick chipboard.

Box assemble

Cut out the box design and assemble the folds. The Circuit Playground Express mounts to the top of the box with four  M3 Screws and M3 female standoffs. The battery sits inside the box with the wires routing through the port on the side. 

We used .8mm thick chipboard for the box and the pole part.

Circuit Playground Express 

We used alligator clips to connect the pins but soldering would be fine. You can rout the wires for the CircuitPlayground Express through the center of the mounting holes for the Circuit playground Express.