It works with Adafruit's Circuit Playground Express so you can make interactive projects with the on-board sensors and components. You can drag & drop blocks to make interactive programs using lights and sounds without having to solder or learning a new syntax.
You can alternatively upload code directly to the Circuit Playground Express with WebUSB, see the steps to do so here.
To get started, we'll need to head over to the Adafruit MakeCode website and follow the steps below.
- Plug in your Circuit Playground Express with a known good data + power USB Cable
- Press the RESET button. Green light means you're ready to MakeCode
- Download the UF2 file and drop it onto the flash drive named CPLAYBOOT which shows up after pressing Reset once or twice in fast succession.
Upload and Test Code
Once you have your CPX setup with the MakeCode UF2, try testing it out by uploading the code to the board.
Click the link below to open up the program in MakeCode. Click on the pink edit icon near the top of the title to open the code.
This will create a project in MakeCode and allow you to edit, modify and upload the code to the board.