3D Printed Parts

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material using PLA filament. Original design source may be downloaded using the links below.

CAD Assembly

The arcade button is panel mounted to the top cover. The top cover snap fits over the case. The speaker is secured to a mount that is attached to the bottom cover. The AA battery pack is clipped to a holder that is secured to the bottom cover. The two handles are secured to the side of the case. The speaker grill is secured to the side of the case. The PropMaker Feather RP2040 is secured to the built-in standoffs on the bottom cover. The slide switch is fitted into a holder that is attached to the bottom cover.

Build Volume

The parts require a 3D printer with a minimum build volume.

• 116mm (X) x 116mm (Y) x 82mm (Z)

Design Source Files

The project assembly was designed in Fusion 360. This can be downloaded in different formats like STEP, STL and more.

Electronic components like Adafruit's boards, displays, connectors and more can be downloaded from the Adafruit CAD parts GitHub Repo.