3D Printing

Save Subscribe

Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Original design source files may be downloaded using the links below.

Slice with settings for PLA material. 


The parts were sliced using CURA using the slice settings below.

  • PLA filament 220c extruder
  • 0.2 layer height
  • 10% gyroid infill
  • 60mm/s print speed
  • 60c heated bed

NinjaFlex Bumper

  • NinjaFlex 95A Filament (Cheetah)
  • 230c extruder
  • 0.4 initial Layer Height
  • 0.42 Line Width
  • 0.2 layer height
  • 10% gyroid infill
  • 60mm/s print speed
  • 50c heated bed
  • Retraction 4mm on Bowden Drives, .5mm on Direct Drive

Supports

  • Support Extrusion Width: .2
  • Support Density: 4%
  • Support Overhang Angle: 60
  • Support Z Height: .21
  • Interface: Off
  • Support Roof: On
  • Support Pattern: Zig Zag

Build Plate Adhesion 

  • Type: skirt
  • Line Count: 4
 Code Assembly 

This guide was first published on Apr 27, 2022. It was last updated on Apr 27, 2022.

This page (3D Printing) was last updated on Apr 25, 2022.

Text editor powered by tinymce.