This holiday season, build some sound effects into your party sweater and turn up the cheer with sleigh bells, Xmas songs and greetings!

This is a simple soldering and sewing project. No microcontroller programming is required! Learn more about the Adafruit Audio FX Sound Board in its learning guide.

For this project you will need:

  • Adafruit Audio FX Sound Board with amp (2MB or 16MB)
  • enclosed speaker set
  • membrane keypad
  • 3xAAA battery holder and batteries
  • premium jumper cables
  • soldering equipment and tools
  • sweater and scrap of fuzzy fleece fabric
  • needle and thread
  • sewing machine (optional)
  • scissors

This guide was first published on Dec 10, 2014. It was last updated on Dec 10, 2014.

This page (Overview) was last updated on Dec 09, 2014.

Text editor powered by tinymce.