You can build your own IoT garden using Adafruit IO and WipperSnapper.

This can help you keep track of your plants by logging data such as the temperature and humidity.

Our sensor node features a batch of Stemma breakouts that keeps track of the air quality and humidity of the soil.

All of the electronics are housed in a 3D printed enclosure that is also water resistant.

This project is powered by the QT Py ESP32-S2 running WipperSnapper, Adafruit’s no-code solution to IOT Projects.

Just stick this in the soil to monitor how wet or dry it is and log that data in a custom dashboard.

With WipperSnapper you can create a beautiful dashboard with gauges and charts so you can visually monitor the health of your garden.



Setting up your Stemma sensors is really simple and easy with WipperSnapper’s built in support for I2C devices.

All of the breakouts are daisy chained together making this a solder-free project.

It’s free to get started just head over to





Angled shot of small square purple dev board.
What has your favorite Espressif WiFi microcontroller, comes with our favorite connector - the STEMMA QT, a chainable I2C port, and has...
Out of Stock
Soil sensor in small potted plant, with wires connected to Adafruit Metro
Most low cost soil sensors are resistive style, where there's two prongs and the sensor measures the conductivity between the two. These work OK at first, but eventually...
In Stock
Angled shot of STEMMA QT breakout board.
Qwiic, or STEMMA QT, is a very efficient way to quickly prototype an idea, but a lot of...
In Stock
Video of someone blowing a dust on a Adafruit SCD-30 - NDIR CO2 Temperature and Humidity Sensor.
Take a deep breath slowly breathe out. Mmm isn't it wonderful? All that air around us, which we bring into our lungs, extracts oxygen from and then breathes out carbon...
In Stock
Top view of Adafruit LC709203F LiPoly / LiIon Fuel Gauge and Battery Monitor powered by a Lipoly battery and an OLED display.
Low cost Lithium Polymer batteries have revolutionized electronics - they're thin, they're light, they can be regulated down to 3.3V and they're easy to charge. On your...
In Stock
Angled shot of light sensor breakout.
When the future is dazzlingly-bright, this ultra-high-range luminosity sensor will help you measure it. The TSL2591 luminosity sensor is an advanced digital light sensor, ideal for use...
In Stock
Lithium Ion Battery Pack with three round cells 3.7V 6600mAh with JST PH connector
Need a massive battery for your project? This lithium-ion pack is made of 3 balanced 2200mAh cells for a total of 6600mA capacity! The cells are connected in parallel and spot-welded...
In Stock
4 x STEMMA QT / Qwiic JST SH 4-Pin Cable
STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long
1 x STEMMA QT / Qwiic JST SH 4-Pin Cable
STEMMA QT / Qwiic JST SH 4-Pin Cable - 100mm Long
16 x M2.5x5mm Screws
M2.5x5mm Screws
1 x Type C USB-C Male OTG Host Type 5.1k Resistor Adapter with Black Housing Cover
Type C USB-C Male OTG Host Type 5.1k Resistor Adapter with Black Housing Cover

This guide was first published on Oct 19, 2022. It was last updated on Jan 28, 2024.

This page (Overview) was last updated on Jan 28, 2024.

Text editor powered by tinymce.