Parts List
STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.
Slice with settings for PLA materialĀ
The parts were sliced using CURA using the slice settings below.
- PLA filament 220c extruder
- 0.2 layer height
- 10% gyroid infill
- 60mm/s print speed
- 60c heated bed
Soil Case Roof
- 0 Top + Bottom Layers
- 50% gyroid infill
Page last edited March 08, 2024
Text editor powered by tinymce.
