Layer 3 | This layer needs no modifications and can be place directly behind layer 3.

Layer 4 | 4 x M2 Brass inserts fit into the back and 2 x M2.5 Brass inserts fit into recessed holes on the front of layer 4.
Make sure the two M2.5 Brass inserts pressed into the recessed holes are not protruding above the level of the acrylic. The Charger could be damaged if they are.
4 x M2 x 4mm screws secure the LiPo charger to layer 4. Make sure the Mini B USB socket is facing outwards.

This guide was first published on Mar 06, 2014. It was last updated on Mar 06, 2014.

This page (Installing the LiPo Charger) was last updated on Mar 04, 2014.

Text editor powered by tinymce.