Several of the smaller components are glued together to strength the assembly.
Two corner pieces are glued together and then they are glued to layer 9.
Check the correct orientation before bonding the corner pieces together.
The two U-Sections of layers 6 & 7 can be glued together. They can be left unglued if you wish.
The Back-Plate must be glued to layer 15. Check the orientation before bonding. The numbering dots must be face down with the Back-Plate glued to the rear of layer 15.

This guide was first published on Mar 06, 2014. It was last updated on Mar 06, 2014.

This page (Glued Parts) was last updated on Feb 26, 2021.

Text editor powered by tinymce.