Remove the lens assembly from the Fascia.
Gently peel off the protective cover on the camera lens
If you have some Magnetic Lenses attach one of the supplied sticky metal rings to the second layer of the lens assembly.
Rebuild the Lens Assembly with the rings in the correct order.
Check the Magnetic Lenses fits correctly.
If you have a wrist strap undo the M3 screw in the lower left corner, slide it out so the gap opens up and place the strap loop into the opening. Refit the M3 screw.
Connect a USB cable to the SnapPiCam and allow the battery to fully charge.

This guide was first published on Mar 06, 2014. It was last updated on Mar 06, 2014.

This page (Part Six) was last updated on Oct 09, 2020.

Text editor powered by tinymce.