Fitting the Camera's FFC is a very delicate operation and there is a risk the cable may become damaged.
Line up the cable with the ZIF Socket on the Raspberry Pi.
Press the FFC into the socket and close the latch.
Carefully bend the FFC flat against the ZIF Socket.
Place the clear 1mm thick layer 9, with the other parts pre-glued to the corner, onto the assembly making sure to thread the power cables correctly through the layer.

This guide was first published on Mar 06, 2014. It was last updated on Apr 24, 2014.

This page (Part Four) was last updated on Mar 05, 2014.

Text editor powered by tinymce.