Download the PDF of Blinka by clicking the green button below.

Blinka can be printed out on any color printer. For best results print double sided on a single sheet of paper. 

Use scissors to carefully cut along the dotted lines.

A glue stick or double sided tape works well to glue the mouth together and attach the head to the body. Make sure to only add glue to the blue parts.


Press and hold together for a few seconds to allow the glue to set.


Add glue to the blue circles on Blinka's head and body. Align carefully and then press and hold these two parts together firmly.

Give Blinka a few minutes after gluing to allow the glue to take hold.

Add the fishing line

Use a pointy tool to poke two holes in Blinka's head.

These will allow us to add a bit of fishing line (or string) to connect her to the inside of the box.

Be careful not to poke your fingers while making these holes!

Once we have two holes side-by-side, it's time to thread the two ends of fishing line or string through.

Blinka is ready to go!

This guide was first published on May 07, 2018. It was last updated on Mar 08, 2024.

This page (Creating Blinka) was last updated on Mar 08, 2024.

Text editor powered by tinymce.