JEDEC Trays

Save Subscribe
This tip is a quicky but very handy! When programming a tray into your pick and place, you will need to know the X&Y dimensions. This sounds simple but measuring them with calipers can be annoying which is when we found this really handy PDF from a JEDEC tray maker that has all the dimensions ready to go!
manufacturing_tray_t.jpg
You can grab the PDF here, for QFP trays.
 Hot Air Tools Squeegees 

This guide was first published on Jul 29, 2012. It was last updated on 2012-07-29 11:58:38 -0400.

This page (JEDEC Trays) was last updated on Jun 21, 2012.

Text editor powered by tinymce.