Assembled and powered on 32x32 RGB LED Matrix Panel - 6mm pitch. The matrix lights up "Adafruit 32x32 *RGB*"
Bring a little bit of Times Square into your home with this sweet 32 x 32 square RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them...
Out of Stock
Teensy 3.1 with welcome pinout card and loose header
Teensy 3.1 is a small, breadboard-friendly development board designed by Paul Stoffregen and PJRC. Teensy 3.1 brings a low-cost 32...
Out of Stock
LED matrix with colorful text scrolling by in mulitple directions and speeds
So you have a Teensy and a RGB LED Matrix...
$19.95
In Stock
Hand removing/installing micro SD card from SD adapter
Add mega-storage in a jiffy using this 8 GB class 4 micro-SD card. It comes with a SD adapter so you can use it with any of our shields or adapters. Preformatted to FAT so it works out...
$9.95
In Stock
5V 4A switching power supply brick with figure 8 power port.
Need a lot of 5V power? This switching supply gives a clean regulated 5V output at up to 4 Amps (4000mA). 110 or 240 input, so it works in any country. The plugs are "US...
$14.95
In Stock
Angle Premium Female/Female Jumper Wires - 40 x 3" (75mm)
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each of...
$3.95
In Stock
Break-away 0.1 inch 36-pin strip right-angle male header
Breakaway header is like the duct tape of electronics. Its great for connecting things together, soldering to perf-boards, fits into any breadboard, etc. We go through these guys real...
$5.95
In Stock