Collecting maker skill badges is fun, but you need a place to display them! Sure, you could put them on your backpack, but we'd like to show you how to make this easy sash to celebrate all the skills you've earned.
Download the free PDF pattern for this sash and print it out (it's 3 pages- one size fits most kids). It's printed with a bit of overlap on each piece so that you can easily tile the pieces together into one sheet.
Cut off the margin on one overlapping piece of the pattern.
Overlap the newly cut piece and line up the pattern with its corresponding neighbor.
Tape the pattern pieces together. Repeat with the remaining piece of paper.
Cut notches in the convex side and slits in the concave sides of the sash's curves. Cut off the sharp corner point. All this will allow the seam allowance to accommodate for the shape it will take once the sash is turned right side out.
Turn the sash right side out by pulling the ends through the hole you left open in the shoulder seam.
Use a chopstick to give definition to the points at the ends of the sash and get ready to press it.
Press your sash with the iron! You can close up the hole in the shoulder seam by hand, or just leave it as-is on the inside of the sash.
You have been successfully subscribed to the Notification List for this product and will therefore receive an e-mail from us when it is back in stock!
For security reasons, an e-mail has been sent to you acknowledging your subscription. Please remember that this subscription will not result in you receiving any e-mail from us about anything other than the restocking of this item.
If, for any reason, you would like to unsubscribe from the Notification List for this product you will find details of how to do so in the e-mail that has just been sent to you!