The diagram below provides a visual reference for wiring of the components. This diagram was created using the software package Fritzing.

Adafruit Library for Fritzing

Use Adafruit's Fritzing parts library to create circuit diagrams for your projects. Download the library or just grab individual parts. Get the library and parts from GitHub - Adafruit Fritzing Parts.

Wired Connections

Most of the connections will be wired to the extra header pins on the TFT FeatherWing.

Potentiometer 1 to Feather M4

• Pin 1 to Pin A0 on Feather M4
• Pin 2 to GND on Feather M4
• Pin 3 to 3V on Feather M4

Potentiometer 2 to Feather M4

• Pin 1 to Pin A1 on Feather M4
• Pin 2 to GND on Feather M4
• Pin 3 to 3V on Feather M4

Push Button

• Pin 1 to Pin D11 on Feather M4
• Pin 2 to GND on Feather M4

Toggle Switch

• Pin 1 to D12 on Feather M4
• Pin 2 to GND on Feather M4

Slide Switch

• Pin 1 to EN on Feather M4
• Pin 2 to GND on Feather M4

Powering

The Adafruit board can be powered via USB or JST using a 3.7v lipo battery. In this project, a 1200mAh battery is used.