First, you'll want to print all these parts. You'll need 3 copies of the outer shell and one of the bathtub-looking part shown above.
I used a modified Z-Corp powder printer courtesy of Viridis 3d. However, chances are you could scale this project to fit on a FDM printer and it should print fine with a little support material here and there.
I used a modified Z-Corp powder printer courtesy of Viridis 3d. However, chances are you could scale this project to fit on a FDM printer and it should print fine with a little support material here and there.
Page last edited September 27, 2013
Text editor powered by tinymce.