# Share Your Project on Adafruit Show and Tell ## Watching Show and Tell ![](https://cdn-learn.adafruit.com/assets/assets/000/121/483/medium800/community_support_Untitled.png?1685652753) You can watch on YouTube. Watch Twitter or The Adafruit Discord **#live-broadcast-chat** for the YouTube URL.  ![](https://cdn-learn.adafruit.com/assets/assets/000/121/484/medium800/community_support_Untitled.png?1685652836) You can also watch the [Adafruit YouTube](https://www.youtube.com/@adafruit) for the live stream. ![](https://cdn-learn.adafruit.com/assets/assets/000/121/485/medium800/community_support_Untitled.png?1685653034) ## Join the Discussion on Discord Discord is Adafruit's preferred chat communications service. The Adafruit Discord server has many channels to discuss various topics. Join the Adafruit Discord by going to [https://adafru.it/discord](https://adafru.it/discord) Click on the Adafruit logo on the left (if not already in the Adafruit area). Then click on the **#live-broadcast-chat** channel to join in on the discussion. ![](https://cdn-learn.adafruit.com/assets/assets/000/121/486/medium800/community_support_Untitled.png?1685653141) **Note:** This Discord channel is also used for the **Ask an Engineer** show from 8pm to 9 pm and is where you can type your question when prompted by the hosts. # Share Your Project on Adafruit Show and Tell ## Joining Show and Tell ![](https://cdn-learn.adafruit.com/assets/assets/000/098/353/medium800/projects_adafruit_2019_4681.jpg?1609698089) ### **THE ADAFRUIT SHOW-AND-TELL LIVE VIDEO!** **Every Wednesday at 7:30 pm United States Eastern Time.** ## How to Join (Please Read This Entire Page Before You Look to Go On) To show and share your project, view the chat in Discord [https://adafru.it/discord](https://adafru.it/discord) in the **#live-broadcast-chat** topic. Look for the link in the chat window to join the **StreamYard chat** at the start time and throughout the broadcast. ![](https://cdn-learn.adafruit.com/assets/assets/000/121/479/medium800/community_support_Untitled.png?1685651955) ## Streamyard [Here's StreamYard's suggested hardware](https://streamyard.com/resources/docs/devices-and-equipment/) ### Setup for best results: - Be sure your webcam/camera and microphone is working with your computer - Try to be on a wired Internet connection for the best streaming speed - Be sure you are in an area that has good lighting to best show you and your work - Use of a headset and microphone is preferable over use of speakers and mic - You can see what others may be discussing in Discord if you have it started beforehand (see the how-to below) The screen below will come up starting StreamYard. Please enter your name and test your camera and microphone. Then click **Enter Studio**. ![](https://cdn-learn.adafruit.com/assets/assets/000/121/480/medium800/community_support_Untitled.png?1685652125) ## If You Plan to use Multiple Cameras with OBS (advanced) If you intend to use OBS to share your screen & webcam (multiple cameras), you should use the OBS Virtual Camera device to switch between devices or scenes rather than having the host do so. ## When you are on - You will be "Backstage", a waiting place until you are called on. See picture below. - Please mute your microphone until called on. - When you are backstage, you can only be seen by the host, you are not seen on the stream until the host shows you. ![](https://cdn-learn.adafruit.com/assets/assets/000/121/487/medium800/community_support_Untitled.png?1685653343) ## When You Are On - Be sure to unmute your microphone for your turn. - Clearly describe what you've been working on. - Keep your turn to around 3 minutes so everyone has a chance to share. ![](https://cdn-learn.adafruit.com/assets/assets/000/121/482/medium800/community_support_Untitled.png?1685652499) ## When you are done, disconnect so someone else may join backstage. ## Wrapping Up **The program ends by around 7:55 pm** Eastern so the **Ask an Engineer** show can start at 8 PM. If there are more people that time allows, please try to join the following week. ![](https://cdn-learn.adafruit.com/assets/assets/000/071/115/medium800/projects_show-and-tell_banner.jpg?1550075512) ## Related Guides - [Cartoon Network MakeCode: Garnet's Palm Gems from Steven Universe](https://learn.adafruit.com/cartoon-network-makecode-garnet-s-palm-gems-from-steven-universe.md) - [Getting Help with Your Technical Support Questions](https://learn.adafruit.com/getting-help-with-your-technical-support-questions.md) - [Checking order status on Adafruit.com](https://learn.adafruit.com/checking-order-status-on-adafruit-dot-com.md) - [How to create an Adafruit account](https://learn.adafruit.com/how-to-create-an-adafruit-account.md) - [Snake Charmer Box](https://learn.adafruit.com/snakecharmer.md) - [How To Place an Essential, COVID-19 Related Order at Adafruit ](https://learn.adafruit.com/how-to-place-an-essential-covid-19-related-order-at-adafruit.md) - [Introducing Circuit Playground](https://learn.adafruit.com/introducing-circuit-playground.md) - [Tilt Controlled Marble Maze](https://learn.adafruit.com/tilt-controlled-marble-maze.md) - [Share your work with Adafruit Playground!](https://learn.adafruit.com/adafruit-playground-notes.md) - [Secure your Account and Unlock 20% Off](https://learn.adafruit.com/secure-your-account-and-unlock-20-off.md) - [Stop Motion Animation](https://learn.adafruit.com/stop-motion-animation.md) - [Qu'est-ce que MakeCode?](https://learn.adafruit.com/makecode-fr.md) - [Trash Panda](https://learn.adafruit.com/trash-panda-circuit-python-crickit.md) - [Sound Activated Shark Mask](https://learn.adafruit.com/sound-activated-shark-mask.md) - [Desktop Dumpster Fire](https://learn.adafruit.com/desktop-dumpster-fire.md)