0

Overview

by Simon Monk
In this tutorial, you will learn how to use NOOBS (New Out Of the Box Software) to setup your Raspberry Pi.

NOOBS is a minimal disk image that can just be copied onto a newly formatted SD card. You then put it into the SD slot on the Raspberry Pi and It downloads the rest of what it needs.
raspberry_pi_F01_02_5a.jpg
YOU WILL NEED
This guide was first published on Oct 01, 2013. It was last updated on Sep 22, 2018. This page (Overview) was last updated on May 04, 2015.

RELATED GUIDES

Arduino Ethernet + SD Card
Using the Arduino to browse files on an SD card remotely
by Mike Barela
Use an Adafruit Metro 328 or Arduino Uno with the Arduino Ethernet Shield to serve up files from the Ethernet Shield SD card. An update from the tutorial posted on ladyada.net on December, 2011 with the latest Arduino IDE and libraries.
Raspberry Pi WiFi Radio
Internet-streamed music around the house
by Phillip Burgess
Raspberry Pi, the little wonder-puter that’s taken the world by storm, is so affordable that we can create single-purpose “appliances” around them without shame. Here’s our take on one of the more popular such applications: internet streaming media, the Pandora music service specifically.
Flora-Powered TARDIS Costume (for Dogs!)
Build a model TARDIS or dress your pet as one with this wearable-scale project
by Mike Barela
The FLORA wearable controller has a all the muscle of a standard Arduino. This project combines Flora with the Adafruit VS1053 audio breakout and amplifier boards to simulate the sounds and light of Dr. Who's TARDIS time travel box. An IR remote can turn the sound off at your command.
OctoPrint - Open Source Host Software
Put your printer on the network with open source host software on a Raspberry Pi Model B+
by Justin Cooper
You can install open source OctoPrint software on your desktop or laptop computer as a general purpose tool to manage and print to a broad selection of 3D printers. The real strength of the OctoPrint project comes into play when you explore embedded solutions on affordable SBCs such as Raspberry Pi and BeagleBone Black computers for wireless printing, custom gcode or shell driven event hooks, automatic timelapse production and uploading and more. Here are some resources to help you setup your OctoPrint software for use with the desktop 3D printers currently offered at Adafruit.