Video of a rectangular microcontroller with a TFT display. A pink manicured finger presses each of the tactile buttons, which are recognized on the TFT display.
Like Missy Elliot, we like to "put our [Feather] down, flip it and reverse it" and that's exactly what...
guides with product
$24.95
In Stock
A white hand with a red manicure holds up an Adafruit Perma-Proto Full-sized Breadboard PCB.
Customers have asked us to carry basic perf-board, but we never liked the look of most basic perf: it's always crummy quality, with pads that flake off and no labeling. Then we...
guides with product
Out of Stock
Angled shot of square black 4 x AA battery holder with 2.1mm plug and on/off switch.
Here's another addition to our growing family of AA battery holders. Behold! A holder for four (4) AA batteries!...
$3.95
In Stock
Assembled Mini Pan-Tilt Kit wired to microcontroller board and moving around
This fully-assembled pan-tilt kit is the perfect way to give your project full range motion with two micro servos. The pan-tilt can rotate roughly 180° from side-to-side and...
$18.95
In Stock
Standard hobby servo with three pin cable
This high-torque standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware, or library to control these servos. Good for...
$12.00
In Stock
Rotary Encoder with rubbery knob
This rotary encoder is the best of the best, it's a high-quality 24-pulse encoder, with detents and a nice feel. It is panel mountable for placement in a box, or you can plug it...
Out of Stock
Breadboard-friendly 2.1mm DC barrel jack
This power jack is designed to fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project. We went for the more expensive "thin pin" type...
$0.95
In Stock
Breadboard-friendly SPDT Slide Switch
These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch...
Out of Stock
Angled shot of a Header Kit for Feather - 12-pin and 16-pin Female Header Set.
These two Female Headers alone are, well, lonely. But pair them with any of our 
$0.95
In Stock
Slim Lithium Ion Polymer Battery 3.7v 400mAh with JST 2-PH connector and short cable
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$6.95
In Stock
5 pieces of Extra-long break-away 0.1 inch 16-pin strip male header
Breakaway header is like the duct tape of electronics, and this header is one better with extra long pins on both sides. This makes it great for connecting things together that...
$3.00
In Stock
Overhead shot of 10x10 aluminum prototyping grid with a microcontroller and three breakout boards.
With most of our dev boards, sensors and feathers now sporting plug-and-play stemma QT ports it can be very fast to...
$6.95
In Stock
Hook-up Wire Spool Set in box with 6 colorful wires coming out
This is a box of six 25ft spools of stranded-core wire. Stranded-core wire is best used for wiring jigs where there's...
$19.95
In Stock
Person quickly stripping a piece of wire
If you've got a lot of wire-stripping to do, you may want to try out an automatic stripper/cutter! They are fantastic for stripping and cutting stranded and solid-core 24 or...
$11.95
In Stock
Red and black flat needle-nose pliers
These Italian-made Hakko pliers are excellent for any precision work. The nose is flattened and fairly short to provide excellent control. The inside of the jaws is also flattened so...
$14.95
In Stock
Solder Wire - 60/40 Rosin Core - 0.5mm/0.02" diameter.
If you want to make a kit you'll need some solder. This 0.1 lb (about 50 grams) spool is a good amount, not too much (like 1 lb spools) and not too little (like those little...
$7.95
In Stock
Angled shot of 4 Piscell AA batteries.
Battery power for your portable project! These batteries are good quality at a good price, and work fantastic with any of the kits or projects in the shop that use AAs. This is a...
$2.95
In Stock
Black Nylon Screw and Stand-off Set with M2.5 Threads, kit box
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker...
guides with product
$16.95
In Stock