Purple poslished fingers holding a Adafruit GEMMA v2 - Miniature wearable electronic platform.
Deprecation Warning: The Gemma bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry the...
guides with product
$9.95
In Stock
Angled shot of board
Deprecation Warning: The Trinket bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry...
guides with product
$6.95
In Stock
USB to TTL Serial Cable With Type A plug and 4 wire sockets
The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at...
$9.95
In Stock
Top-down view of 6 pairs of short wire alligator clips.
Connect this to that without soldering using these handy mini alligator clip test leads. Approximately 4.5" overall cables with alligator clip on each end, color coded. You get 12...
$3.95
In Stock
Bundle of Small Alligator Clip Test Leads
Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors....
$3.95
In Stock
Kit contents shot with circular microcontroller with copper pads, needles, coin cell battery holder, sewable LEDs, micro USB to USB-A cable, alligator clips, and conductive sewing thread.
Get started with Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic project. There's a GEMMA M0, four sewable bright RGB pixels, a...
guides with product
$27.95
In Stock
Assembled electronic parts included in kit next to a plush Owl.
Mod your stuffed toy to chirp, meow, or woof! This GEMMA parts pack makes it easy to add simple sounds to any plush toy, and especially the
guides with product
$19.95
In Stock
A collection of electronic parts included in a starters pack.
Go interactive with sensors and Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic sensing project (or two). There's a GEMMA board, four...
guides with product
$44.95
In Stock
A collection of electronic parts included in the starters pack.
Make your wearables glow with the GEMMA sequin pack! This GEMMA parts pack makes it easy to add light to your wearables. It comes with thread, needles, a holder for 2...
guides with product
$17.95
In Stock
Video of a rotatting Arduino GEMMA - Miniature wearable electronic platform.
What do you get when you combine an Adafruit classic with geniuses at Arduino? The Arduino GEMMA! It's a tiny wearable platform board with a lot of might in a 1"...
guides with product
No Longer Stocked