Now that you've tested the Choreo successfully, you can scroll down to find the Code section of the page. When you're in IoT Mode and you run a Choreo, Temboo automatically generates code that can be used to make the same API call from an Arduino sketch. Copy the code, and paste it into a new sketch in the Arduino IDE.

In order to run this sketch on your Arduino, it needs to be configured with an appropriate TembooAccount.h header file that contains your Temboo account information and internet shield setup information. To create the header file, make a new tab in the Arduino IDE, and name it TembooAccount.h.

On the Twilio SendSMS Choreo page beneath the sketch code that you previously copied and pasted into the Arduino IDE, you’ll find another block of generated code containing #define statements and details about your internet shield. This is your header file. Copy the contents of the header into the TembooAccount.h tab in your Arduino IDE.

With both files in place, you are ready to start sending SMS from your Arduino. Save and upload the sketch, open the serial monitor, and watch the texts roll in!