Angled shot of a MCP3008 - 8-Channel 10-Bit ADC With SPI Interface.
Need to add analog inputs? This chip will add 8 channels of 10-bit analog input to your microcontroller or microcomputer project. It's super easy to use and uses SPI so only 4 pins...
$4.50
In Stock
Small, black, analog temperature sensor next to US quarter for scale.
Wide range, low power temperature sensor outputs an analog voltage that is proportional to the ambient temperature. To use, connect pin 1 (left) to power (between 2.7 and 5.5V), pin 3...
$2.75
In Stock
Angled shot of full sized breadboard.
This is a 'full-size' premium quality breadboard, 830 tie points. Good for small and medium projects. It's 2.2" x 7" (5.5 cm x 17 cm) with a standard double-strip...
$5.95
In Stock
Angled shot of half-size solderless breadboard with red and black power lines.
This is a cute, half-size breadboard with 400 tie points, good for small projects. It's 3.25" x 2.2" / 8.3cm x 5.5cm with a standard double-strip in the...
$4.95
In Stock
Angled shot of assembled Adafruit Assembled Pi Cobbler Breakout on a populated breadboard connected to a Raspberry Pi A via a GPIO ribbon cable.
Now that you've finally got your hands on a Raspberry Pi® Model B , you're probably itching to make some fun embedded computer...
guides with product
No Longer Stocked
Angled shot of a GPIO Ribbon Cable for Raspberry Pi Model A and B.
That new Raspberry Pi® Model A or B computer you just got has a row of 2x13 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who...
$2.95
In Stock
Angled shot of clear acrylic assembled Adafruit enclosure for Raspberry Pi Model A/B.
Discontinued - you can grab Adafruit Pi Box Plus - Enclosure for RasPi Model B+/Pi 2/ Pi 3...
guides with product
No Longer Stocked