Overhead video of TFT display running boot-up animation including accelerometer and colored polygons.
This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own...
Out of Stock
Trinket wired up to two servo motor pan-tilt kit.
Deprecation Warning: The Pro Trinket bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still...
$9.95
In Stock
Breadboard-friendly SPDT Slide Switch
These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch...
$0.95
In Stock
Lithium Ion Polymer Battery 3.7v 100mAh with JST 2-PH connector
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
Out of Stock
Adafruit LiIon/LiPoly Backpack soldered onto a Pro Trinket, plugged into a solderless breadboard.
If you have an ItsyBitsy or Pro Trinket you probably know it's the perfect little size for a portable project. This LiPoly backpack makes it really easy to do! Instead of wiring 2...
$4.95
In Stock
Plastic cylinder with two wires sticking out
The "poor man's" accelerometer/motion sensor! These spring-vibration switches are high sensitivity non-directional vibration induced trigger switches....
$0.95
In Stock
USB Patterned Fabric Cable with Type A and Micro B ends
Oooh it's so soft! And that beautiful pattern! If you have to have visible cables then you might as well have the nicest fabric bound cable with a eye-catching snake-like...
Discontinued
Assembled PrintrBot Simple Metal 3D Printer
New from Printrbot, the Metal Simple is a brand new rock solid, all metal, fully-assembled Printrbot Simple! As opposed to the Printrbot...
Discontinued
Silicone Cover Stranded-Core Wire - 2m 30AWG Red
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire...
$0.75
In Stock
Angled shot of 12mm x 12mm red on-off power button
Push once to turn on, push again to turn off! This clicky switch makes a great power switch or mode toggler. We like this switch because it's breadboard friendly and more fun than...
$1.95
In Stock
Spool of PLA filament for 3D printers - white color with 1.75mm Diameter.
Having a 3D printer without filament is sort of like having a regular printer without paper or ink.  And while a lot of printers come with some filament there's a good chance...
Discontinued
Spool of PLA filament for 3D printers - white color with 3mm Diameter.
Having a 3D printer without filament is sort of like having a regular printer without paper or ink.  And while a lot of printers come with some filament there's a good chance...
Discontinued
Spool of ABS Filament for 3D Printers - silver color with 3mm Diameter.
Having a 3D printer without filament is sort of like having a regular printer without paper or ink.  And while a lot of printers come with some filament there's a good chance...
Discontinued
Spool of PLA Filament for 3D Printers - Silver gray color with 1.75mm Diameter
Having a 3D printer without filament is sort of like having a regular printer without paper or ink.  And while a lot of printers come with some filament there's a good chance...
Discontinued
Spool of PLA filament for 3D Printers - black color with 1.75mm Diameter.
Having a 3D printer without filament is sort of like having a regular printer without paper or ink.  And while a lot of printers come with some filament there's a good chance...
Discontinued
Spool of PLA filament for 3D printers - black color with 3mm Diameter.
Having a 3D printer without filament is sort of like having a regular printer without paper or ink.  And while a lot of printers come with some filament there's a good...
Discontinued
Smallish table-vise with adjustable jaws and universal joint
The best mini-vise for working on smaller PCBs (2.875" or less in one dimension)! The jaws are strong plastic that wont damage the PCB and doesn't mind if you hit it with the...
$37.50
In Stock
Third Hand Magnifier with two alligator grabbers and Magnifying Glass
The classic 'third hand tool,' as seen on every desk! We have one next to our Panavise jr, they complement each other well. This...
$6.95
In Stock