ScoutMakes DRV5032 Hall Sensor Downloads

ScoutMakes DRV5032 Hall Sensor

Add a magnetic hall sensor to your project easily with this DRV5032 breakout board with a JST-PH 3 pin connector

Image for user tinkeringtech
by Lalindra Jayatilleke
published September 23, 2024, last edited July 28, 2025
posted in Sensors/ Proximity Breakout Boards STEMMA
Save Link Note Download
2
Beginner
Project guide

Downloads

Page last edited July 28, 2025

Text editor powered by tinymce.

 CircuitPython
Related Guides
ATtiny Breakout with seesaw featuring two STEMMA QT I2C connectors and multiple pin connections along the edges on a dark background.
Adafruit ATtiny Breakouts with seesaw
By Kattni Rembor
beginner
26
ADS7830 8-Channel 8-Bit ADC breakout board with labeled pins for GND, SDA, SCL, and more. Features two STEMMA QT I2C connectors on a compact black PCB.
Adafruit ADS7830 8-Channel 8-Bit ADC
By Liz Clark
beginner
2
Use an IR Optical Sensor that can detect whenever an object passes by the sensor. The breakout is mounted to a 3D printed bracket right above the 3D printer to sense filament use.
IoT Filament Sensor
By Ruiz Brothers
intermediate
9
Raspberry Pi 4 Model B with a sad face emoji overlay and a green waveform pattern. Visible GPIO pins and board components.
Raspberry Pi I2C Clock Stretching Fixes
By Carter Nelson
beginner
4
AS5600 magnetic angle sensor breakout board with labeled pins for VIN, 3V, GND, SCL, SDA, and OUT. Features two STEMMA QT I2C connectors on a compact PCB.
Adafruit AS5600 Magnetic Angle Sensor
By Liz Clark
beginner
6
A small CH552 QT Py microcontroller board with a USB-C port, several labeled pins, and a reset button. It includes a STEMMA QT I2C JST connector on the side.
Adafruit CH552 QT Py
By Liz Clark
intermediate
2
SHTC3 sensor breakout board with labeled pins: VIN, GND, 3Vo, SCL, and SDA. Features 2 STEMMA QT I2C connectors and electronic components on a black PCB.
Adafruit Sensirion SHTC3 - Temperature & Humidity...
By Bryan Siepert
beginner
11
A small MCP3421 18-Bit ADC circuit board featuring a green terminal block, labeled VIN, GND, SDA, and SCL connections, and two white STEMMA QT I2C connectors. The board is marked "18 bit ADC" and has multiple solder points.
Adafruit MCP3421 18-Bit ADC
By Liz Clark
beginner
2
A PiCowbell prototyping board with green terminal blocks and a grid of solder points. It features a reset button and a STEMMA QT I2C connector on a black background.
Adafruit Terminal PiCowbell for Pico
By Liz Clark
beginner
1
Glowing orange orb with a jack-o'-lantern face sits atop a gray 3D printed hexagonal base. A small green light is visible inside the base.
PropMaker Jack O'Lantern
By Ruiz Brothers
intermediate
22
A hand presses a knob on a NeoSlider linear potentiometer with visible red LED lights. Wires are connected to the potentiometer for power and signal.
Adafruit NeoSlider
By Kattni Rembor
beginner
22
The colorful DIY MIDI controller with an OLED display and potentiometers and rotary encoder to adjust parameters. It has five keys below to play MIDI notes. It's connected via USB to a mobile phone.
USB MIDI Keyset Controller
By Ruiz Brothers
intermediate
42
A small black NeoDriver I2C to NeoPixel Driver circuit board with a green terminal block and labeled pins, including GND, VCC, SDA, and SCL. It features a chip at the center and 2 STEMMA QT I2C connectors on each side.
Adafruit NeoDriver - I2C to NeoPixel Driver
By Liz Clark
beginner
12
PyPortal touchscreen display showing a reflow oven controller interface with a temperature graph and control options. Wires are connected to the device.
EZ Make Oven
By Dan Cogliano
beginner
90
An old looking tree with fall colored leaves has soulful woodgrain-inspired eyes using an Adafruit Monster M4sk.
Tree with Animated Eyes and Motion Sensor
By Erin St Blaine
intermediate
34
Search

Search

Categories