Fire-up your 3D printer... a 6X6 inch build volume is the absolute minimum needed - printers with more elbow room are recommended.

Parts can be printed in whatever material you like. I used PLA, 3 shells, solid infill, and support material. 

Wheny you're ready, download the archive and get started!

Or edit / re-mix the model on Tinkercad!

This guide was first published on Dec 23, 2015. It was last updated on Dec 23, 2015.

This page (3D Printing) was last updated on Dec 13, 2015.

Text editor powered by tinymce.