• The TFT Gizmo bolts onto the Circuit Playground Bluefruit with its included M3 screws.
  • The oval speaker plugs into the Gizmo's JST speaker plug at A0.
  • The LiPo battery plugs into the JST-PH battery extension cable.
  • The JST-PH battery extension cable plugs into the JST battery socket on the Circuit Playground Bluefruit.

The only soldering required is for the on/off switch. Using a JST-PH battery extension cable, make a splice on the red power wire. Solder each end to a connection on a slide switch.

You could also plug a battery directly into the Circuit Playground Bluefruit if you wanted to completely avoid soldering.

This guide was first published on Apr 06, 2021. It was last updated on Jun 11, 2024.

This page (Circuit Diagram) was last updated on Mar 08, 2024.

Text editor powered by tinymce.