List of .STL Files

  • bottom_star_final.stl
  • lens_final.stl
  • top_star_final.stl

The case is made up of three 3D printed parts that snap-fit together.

The bottom of the case has mounting points for the Circuit Playground Bluefruit, the oval speaker and the on/off switch.

The bottom of the case also has button pressers and cut-outs to access the Gizmo TFT's mounting screws.

The .STL files and Fusion360 file are available on Thingiverse.

This guide was first published on Apr 06, 2021. It was last updated on Apr 06, 2021.

This page (3D Printing) was last updated on Apr 05, 2021.

Text editor powered by tinymce.