Circuit Diagram
The diagram provides a general visual reference for wiring of the components once you get to the Assembly page. This diagram was created using the software package Fritzing.
Adafruit Library for Fritzing
Adafruit uses the Adafruit's Fritzing parts library to create circuit diagrams for projects. You can download the library or just grab individual parts. Get the library and parts from GitHub - Adafruit Fritzing Parts.
LED nOOd
The nOOd + end connects to the + CC Out terminal block
The nOOd - end is soldered to the + end of the second nOOd.
Measure a silicone wire 630mm long to reach the tip of the second nOOd to the - CC Out terminal block.
TPS DIP switches
DIP switch #2 (100) is flipped to on. All others are off.
Slide Switch
The slide switch is soldered to the PWM pin and the G pin on the TPS board.
Lipo Battery
A JST socket cable is connected to the - (black) and + (red) 3-5Vin terminal blocks.
nOOd gap close
Close the filament gap by stacking the + end to the top of the - end and soldering together with a silicone wire.
Page last edited September 10, 2025
Text editor powered by tinymce.
