# Robotic Xylophone with Adafruit Grand Central

## Overview

https://youtu.be/pl2HLWOYdqk

## Your New Musical Butler

This robotic musician uses miniature solenoids to tap out melodies on a [toy xylophone](https://www.amazon.com/Subay-Colorful-Xylophone-Inspire-Childrens/dp/B01MSOSY63/ref=sr_1_14?ie=UTF8&qid=1548972041&sr=8-14&keywords=xylophone). The [Adafruit Grand Central M4](https://learn.adafruit.com/adafruit-grand-central) controls each of the eight solenoids using CircuitPython,&nbsp;one of the fastest growing programming languages, specifically designed to simplify experimenting and learning.&nbsp;

This guide demonstrates how to build your own robotic xylophone rig, and how create your own melodies in CircuitPython.

![](https://cdn-learn.adafruit.com/assets/assets/000/070/531/medium800/robotics___cnc_IMG_1201.jpg?1549062265)

## The Electronics
Featured
### Adafruit Grand Central M4 Express featuring the SAMD51

[Adafruit Grand Central M4 Express featuring the SAMD51](https://www.adafruit.com/product/4064)
Are you ready? Really ready? Cause here comes the **Adafruit Grand Central** featuring the **Microchip ATSAMD51**. This dev board is so big, it's not named after a Metro train, it's a whole freakin' _station_!

This board is like a freight...

In Stock
[Buy Now](https://www.adafruit.com/product/4064)
[Related Guides to the Product](https://learn.adafruit.com/products/4064/guides)
![Angled Shot of the Adafruit Grand Central M4 Express featuring the SAMD51.](https://cdn-shop.adafruit.com/640x480/4064-05.jpg)

Featured
### Mini Push-Pull Solenoid - 5V

[Mini Push-Pull Solenoid - 5V](https://www.adafruit.com/product/2776)
Solenoids are basically electromagnets: they are made of a coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull (from one end) or push (from the other).

This...

In Stock
[Buy Now](https://www.adafruit.com/product/2776)
[Related Guides to the Product](https://learn.adafruit.com/products/2776/guides)
![Mini Push-Pull Solenoid wired to Trinket, activating back and forth](https://cdn-shop.adafruit.com/product-videos/640x480/2776-07.jpg)

Featured
### N-channel power MOSFET

[N-channel power MOSFET](https://www.adafruit.com/product/355)
When you need to switch a lot of power, N-channel MOSFETs are best for the job. These FETs can switch over 60A and 30V and are TO-220 packages so they fit nicely into any breadboard or perfboard. Heat sinking is easy with TO-220's, but because of the very low Rds(on) of down to 0.009 ohms...

Out of Stock
[Buy Now](https://www.adafruit.com/product/355)
[Related Guides to the Product](https://learn.adafruit.com/products/355/guides)
![N-channel power MOSFET in TO-220 package](https://cdn-shop.adafruit.com/640x480/355-02.jpg)

Featured
### 1N4001 Diode - 10 pack

[1N4001 Diode - 10 pack](https://www.adafruit.com/product/755)
This here is a 10 pack of the classic 1N4001 power blocking diode. These are good for reverse polarity protection (put it between your DC power jack and circuitry to avoid a negative-voltage that would zap your delicate electronics), kickback protection (place across your solenoids, relays...

Out of Stock
[Buy Now](https://www.adafruit.com/product/755)
[Related Guides to the Product](https://learn.adafruit.com/products/755/guides)
![ 10 pack of 1N4001 Diodes](https://cdn-shop.adafruit.com/640x480/755-03.jpg)

Featured
### 5V 2A (2000mA) switching power supply - UL Listed

[5V 2A (2000mA) switching power supply - UL Listed](https://www.adafruit.com/product/276)
This is an FCC/CE certified and UL listed power supply. Need a lot of 5V power? This switching supply gives a clean regulated 5V output at up to 2000mA. 110 or 240 input, so it works in any country. The plugs are "US 2-prong" style so you may need a plug adapter, but you can pick one...

In Stock
[Buy Now](https://www.adafruit.com/product/276)
[Related Guides to the Product](https://learn.adafruit.com/products/276/guides)
![Angled shot of power supply.](https://cdn-shop.adafruit.com/640x480/276-06.jpg)

Featured
### USB cable - USB A to Micro-B

[USB cable - USB A to Micro-B](https://www.adafruit.com/product/592)
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or microcontroller

Approximately 3 feet / 1 meter long

Out of Stock
[Buy Now](https://www.adafruit.com/product/592)
[Related Guides to the Product](https://learn.adafruit.com/products/592/guides)
![USB cable - USB A to Micro-B - 3 foot long](https://cdn-shop.adafruit.com/640x480/592-01.jpg)

Featured
### Premium Male/Male Jumper Wires - 20 x 3" (75mm)

[Premium Male/Male Jumper Wires - 20 x 3" (75mm)](https://www.adafruit.com/product/1956)
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 20 (2&nbsp;pieces of each of ten rainbow colors). They have 0.1" male header contacts on either end and fit cleanly next to each...

In Stock
[Buy Now](https://www.adafruit.com/product/1956)
[Related Guides to the Product](https://learn.adafruit.com/products/1956/guides)
![Angled shot of Premium Male/Male Jumper Wires - 20 x 12 (300mm)](https://cdn-shop.adafruit.com/640x480/1956-02.jpg)

Featured
### JST-PH Battery Extension Cable - 500mm

[JST-PH Battery Extension Cable - 500mm](https://www.adafruit.com/product/1131)
By popular demand, we now have a handy extension cord for all of our JST PH-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH compatible socket, and the other end has a matching plug. Between the two, 500mm of color coded wire. Handy for wearable...

In Stock
[Buy Now](https://www.adafruit.com/product/1131)
[Related Guides to the Product](https://learn.adafruit.com/products/1131/guides)
![Front shot of JST-PH Battery Extension Cable.](https://cdn-shop.adafruit.com/640x480/1131-00.jpg)

Featured
### Hook-up Wire Spool Set - 22AWG Solid Core - 6 x 25 ft

[Hook-up Wire Spool Set - 22AWG Solid Core - 6 x 25 ft](https://www.adafruit.com/product/1311)
Perfect for bread-boarding, free wiring, etc. This box contains **6** spools of **solid-core** wire. These&nbsp;spools of solid-core wires are&nbsp;easily soldered to,&nbsp;keeps its shape pretty well when bent&nbsp;and is rated 80C and 300V (UL AWM style 1007). We...

In Stock
[Buy Now](https://www.adafruit.com/product/1311)
[Related Guides to the Product](https://learn.adafruit.com/products/1311/guides)
![Hook-up Wire Spool Set in box with 6 colorful wires coming out](https://cdn-shop.adafruit.com/640x480/1311-04.jpg)

Featured
### Female DC Power adapter - 2.1mm jack to screw terminal block

[Female DC Power adapter - 2.1mm jack to screw terminal block](https://www.adafruit.com/product/368)
If you need to connect a DC power wall wart to a board that doesn't have a DC jack - this adapter will come in very handy! There is a 2.1mm DC jack on one end, and a screw terminal block on the other. The terminals are labeled with positive/negative assuming a positive-tip configuration...

Out of Stock
[Buy Now](https://www.adafruit.com/product/368)
[Related Guides to the Product](https://learn.adafruit.com/products/368/guides)
![Angle shot Female DC Power adapter - 2.1mm jack to screw terminal block](https://cdn-shop.adafruit.com/640x480/368-03.jpg)

Featured
### Hakko Professional Quality 20-30 AWG Wire Strippers

[Hakko Professional Quality 20-30 AWG Wire Strippers](https://www.adafruit.com/product/527)
These are the finest wire strippers we have used, and if you have to do a lot of wiring, you will agree! They have soft rounded grips - very comfortable to use, and precision ground notches that do a perfect job every time. No more yanking or twisting to strip wires cleanly and quickly.<br...></br...>

Out of Stock
[Buy Now](https://www.adafruit.com/product/527)
[Related Guides to the Product](https://learn.adafruit.com/products/527/guides)
![Red and black multi-size wire stripplers, closed](https://cdn-shop.adafruit.com/640x480/527-02.jpg)

## Materials

- [Xylophone](https://www.amazon.com/Subay-Colorful-Xylophone-Inspire-Childrens/dp/B01MSOSY63/ref=sr_1_14?ie=UTF8&qid=1548972041&sr=8-14&keywords=xylophone)
- Wire strippers
- Laser cutter and acrylic (optional)

Doing some prep work ahead of time can simplify this build immensely. Trimming and setting aside the wires you'll need can save yourself confusion later on. Follow this image to find and set aside what you'll need before diving into building the circuit.

![](https://cdn-learn.adafruit.com/assets/assets/000/069/778/medium800/robotics___cnc_IMG_1050.jpg?1548198408)

## Play On

Read on to learn how to build your own robotic musician!

![](https://cdn-learn.adafruit.com/assets/assets/000/070/536/medium800/robotics___cnc_638E3FC7-113C-4342-BFE5-1E15C43B6655.jpg?1549072866)

# Robotic Xylophone with Adafruit Grand Central

## Solenoid Circuit

If you'd like to breadboard the circuit before soldering it together permanently, follow this fritzing diagram. (Note the picture below shows the Metro, the Grand Central wiring is identical)

If you'd like to jump into soldering, scroll down to see the steps.

![](https://cdn-learn.adafruit.com/assets/assets/000/070/523/medium800/robotics___cnc_8FETs_bb.jpg?1549058939)

## Gather what you'll need
![](https://cdn-learn.adafruit.com/assets/assets/000/069/773/medium800/robotics___cnc_IMG_1045.jpg?1548198177)

## The N-channel Power MOSFET
Because solenoids draw a lot of current at once, each will be connected to a MOSFET transistor. From left to right, the legs of this MOSFET are Gate (G), Drain (D), and Source (S).

![robotics___cnc_IMG_1208.png](https://cdn-learn.adafruit.com/assets/assets/000/069/772/medium640/robotics___cnc_IMG_1208.png?1550519776)

Cut and strip 8 red and 8 black each about 1 inch in length

![robotics___cnc_IMG_1046.jpg](https://cdn-learn.adafruit.com/assets/assets/000/069/779/medium640/robotics___cnc_IMG_1046.jpg?1548198630)

Cut eight pairs of blue wires of varying lengths. These will be used to connect each solenoid unit to its digital pin on the board.

![robotics___cnc_IMG_1049_copy.jpg](https://cdn-learn.adafruit.com/assets/assets/000/069/781/medium640/robotics___cnc_IMG_1049_copy.jpg?1548198917)

Eight pairs of short male-to-male jumper wires will be used to create robust connections to each individual solenoid.&nbsp;

![robotics___cnc_IMG_1045_copy.jpg](https://cdn-learn.adafruit.com/assets/assets/000/069/782/medium640/robotics___cnc_IMG_1045_copy.jpg?1548199240)

Set aside eight N-channel power MOSFET transistors and eight 1N4001 diodes

The N channel MOSFETs will handle switching power on and off to the solenoids. These FETs can switch an impressive 60A and 30V and are in TO-220 packages so they fit nicely into the proto-board.&nbsp;

The classic 1N4001 power blocking diode will be used here for kickback protection for our solenoids.

![robotics___cnc_IMG_1047.jpg](https://cdn-learn.adafruit.com/assets/assets/000/069/780/medium640/robotics___cnc_IMG_1047.jpg?1548198729)

## Soldering the Circuit
Solder each of the 8 MOSFETs in place.

You will notice that 8 MOSFETs overrun the laterally connected pins on the proto board. This is ok, we will create our own connections where needed later.

![robotics___cnc_IMG_1109.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/499/medium640/robotics___cnc_IMG_1109.jpg?1549056395)

![robotics___cnc_IMG_1114.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/501/medium640/robotics___cnc_IMG_1114.jpg?1549056605)

![robotics___cnc_IMG_1115.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/502/medium640/robotics___cnc_IMG_1115.jpg?1549056622)

Solder in the 1N4001 diodes.&nbsp;

Be careful of orientation!

Clip off the excess leads, but be careful not to clip the leads further down! You will need these to make connections later.

![robotics___cnc_IMG_1118.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/503/medium640/robotics___cnc_IMG_1118.jpg?1549056747)

![robotics___cnc_IMG_1119.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/504/medium640/robotics___cnc_IMG_1119.jpg?1549056827)

![robotics___cnc_IMG_1121.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/506/medium640/robotics___cnc_IMG_1121.jpg?1549057134)

![robotics___cnc_IMG_1123.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/507/medium640/robotics___cnc_IMG_1123.jpg?1549057147)

Solder in the red wires connecting the power line to the circuit.&nbsp;

Once again, clip off leads where necessary, leaving extra where the pads aren't already connected.

![robotics___cnc_IMG_1124.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/508/medium640/robotics___cnc_IMG_1124.jpg?1549057329)

![robotics___cnc_IMG_1126.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/509/medium640/robotics___cnc_IMG_1126.jpg?1549057396)

![robotics___cnc_IMG_1127.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/510/medium640/robotics___cnc_IMG_1127.jpg?1549057438)

![robotics___cnc_IMG_1128.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/511/medium640/robotics___cnc_IMG_1128.jpg?1549057466)

Time for the ground connections!

Use these wires to connect the ground line to the Source (S) leg of each MOSFET.

![robotics___cnc_IMG_1130.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/512/medium640/robotics___cnc_IMG_1130.jpg?1549057603)

![robotics___cnc_IMG_1131.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/513/medium640/robotics___cnc_IMG_1131.jpg?1549057678)

![robotics___cnc_IMG_1132.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/514/medium640/robotics___cnc_IMG_1132.jpg?1549057736)

![robotics___cnc_IMG_1133.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/515/medium640/robotics___cnc_IMG_1133.jpg?1549057750)

Using the blue wires, connect Gate (G) leg of the MOSFET to pins 2 through 9 on the Grand Central.&nbsp;

Use the wire strippers to size your wires to the lengths you need.

![robotics___cnc_IMG_1135.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/516/medium640/robotics___cnc_IMG_1135.jpg?1549057860)

![robotics___cnc_IMG_1136.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/517/medium640/robotics___cnc_IMG_1136.jpg?1549057938)

![robotics___cnc_IMG_1137.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/518/medium640/robotics___cnc_IMG_1137.jpg?1549058083)

Now, importantly, we must connect the ground line of this circuit to Grand Central's ground. **Don't forget this step!**

![robotics___cnc_IMG_1142.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/519/medium640/robotics___cnc_IMG_1142.jpg?1549058227)

Solder the jumper wires in place, connecting one wire to each end of the 1N4001 diodes.

As before, trim excess where necessary.

![robotics___cnc_IMG_1143.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/520/medium640/robotics___cnc_IMG_1143.jpg?1549058304)

![robotics___cnc_IMG_1144.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/521/medium640/robotics___cnc_IMG_1144.jpg?1549058424)

![robotics___cnc_IMG_1146.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/522/medium640/robotics___cnc_IMG_1146.jpg?1549058444)

Now it's time to fold over the extra length of wire we've left sticking through the bottom and make the missing connections where the pads aren't already connected.

![robotics___cnc_IMG_1149.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/524/medium640/robotics___cnc_IMG_1149.jpg?1549059619)

![robotics___cnc_IMG_1150.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/525/medium640/robotics___cnc_IMG_1150.jpg?1549059642)

![robotics___cnc_IMG_1153.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/526/medium640/robotics___cnc_IMG_1153.jpg?1549059660)

## The Plug

&nbsp;

Connect a red and black wire to the [female DC terminal block adapter](https://www.adafruit.com/product/368).

Solder these wires to the ground and power lines on the proto board (labeled "G" and "+").

![robotics___cnc_IMG_1053.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/537/medium640/robotics___cnc_IMG_1053.jpg?1549072952)

![robotics___cnc_IMG_1055.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/538/medium640/robotics___cnc_IMG_1055.jpg?1549073061)

![robotics___cnc_IMG_1056.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/539/medium640/robotics___cnc_IMG_1056.jpg?1549073092)

![robotics___cnc_IMG_1157.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/540/medium640/robotics___cnc_IMG_1157.jpg?1549073174)

![robotics___cnc_IMG_1159.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/541/medium640/robotics___cnc_IMG_1159.jpg?1549073214)

## Connect JST Extension Cables

These male-male jumper wires make reliable connections between the proto board and JST cables, as well as making your bundle of wires easy to organize.

![](https://cdn-learn.adafruit.com/assets/assets/000/070/530/medium800/robotics___cnc_IMG_1434.jpg?1549062126)

## Add Headers

Finally, solder headers onto your proto-shield to connect it to the Grand Central.

Insert the headers into your board (you don't need to add the long 2x20 header for this project).

&nbsp;

Place your assembled proto-shield on top of the headers.

&nbsp;

Solder in place!

![robotics___cnc_IMG_1174.jpg](https://cdn-learn.adafruit.com/assets/assets/000/071/371/medium640/robotics___cnc_IMG_1174.jpg?1550509194)

![robotics___cnc_IMG_1178.jpg](https://cdn-learn.adafruit.com/assets/assets/000/071/372/medium640/robotics___cnc_IMG_1178.jpg?1550509208)

![robotics___cnc_IMG_1179.jpg](https://cdn-learn.adafruit.com/assets/assets/000/071/373/medium640/robotics___cnc_IMG_1179.jpg?1550509221)

![robotics___cnc_IMG_1183.jpg](https://cdn-learn.adafruit.com/assets/assets/000/071/374/medium640/robotics___cnc_IMG_1183.jpg?1550509244)

![](https://cdn-learn.adafruit.com/assets/assets/000/070/534/medium800/robotics___cnc_638E3FC7-113C-4342-BFE5-1E15C43B6655_copy.jpg?1549072620)

Time to move on to the next step!

# Robotic Xylophone with Adafruit Grand Central

## Assemble the Frame

You will need some structure to position the solenoids above the xylophone.

The .AI file below contains a design suited for laser cutting out of 1/8" thick acrylic. If you don't have access to a laser cutter, you can use this template to cut one out of another material such as wood or cardstock, or design something new for your particular xylophone situation.

[Xylophone-frame.ai](https://cdn-learn.adafruit.com/assets/assets/000/070/339/original/Xylophone-frame.ai?1548971934)
![](https://cdn-learn.adafruit.com/assets/assets/000/069/783/medium800thumb/robotics___cnc_IMG_1209.2019-01-22_18_41_36.jpg?1548200661)

Some small [0-80, 1/4" thread screws](https://www.mcmaster.com/91735A264) are perfectly sized to hold each solenoid to the bar.

A [tiny screwdriver](https://www.adafruit.com/product/424) is useful in this instance.

![robotics___cnc_IMG_1057.jpg](https://cdn-learn.adafruit.com/assets/assets/000/069/784/medium640/robotics___cnc_IMG_1057.jpg?1548200675)

![robotics___cnc_IMG_1058.jpg](https://cdn-learn.adafruit.com/assets/assets/000/069/785/medium640/robotics___cnc_IMG_1058.jpg?1548200685)

![robotics___cnc_IMG_1154.jpg](https://cdn-learn.adafruit.com/assets/assets/000/070/528/medium640/robotics___cnc_IMG_1154.jpg?1549059902)

## Height Adjustable

You will notice there is some wiggle room in the slots where the top bar fits in. This allows the user to precisely position the bar above the xylophone so each solenoid hits the note perfectly.

![](https://cdn-learn.adafruit.com/assets/assets/000/070/529/medium800/robotics___cnc_IMG_1156.jpg?1549059918)

# Robotic Xylophone with Adafruit Grand Central

## CircuitPython

![](https://cdn-learn.adafruit.com/assets/assets/000/070/392/medium800/robotics___cnc_makecode_circuitpython_circuit_playground_adafruit_blinka_computer.png?1549044444)

## Getting Familiar

CircuitPython is a programming language based on Python, one of the fastest growing programming languages in the world. It is specifically designed to simplify experimenting and learning to code on low-cost microcontroller boards.

CircuitPython is easiest to use within the Mu Editor. If you haven't previously used Mu,&nbsp;[this guide will get you started](https://learn.adafruit.com/welcome-to-circuitpython/installing-mu-editor).

If you haven't used CircuitPython together before, make sure you've updated it with the latest version of CircuitPython.&nbsp;[This guide will show you how](https://learn.adafruit.com/adafruit-circuit-playground-express/circuitpython-quickstart).

## Demo Code

Plug your Grand Central into your computer (mac/PC/Linux) via a known good USB A to micro-B cable. Your board should appear to the computer as a flask disk drive named&nbsp; **CIRCUITPY**. If you see a disk name **GCM4BOOT** , try to press the reset button again. If the only drive name you get is **GCM4BOOT** , CircuitPython may not be loaded on the board. You can load CircuitPython&nbsp;[per this guide](https://learn.adafruit.com/adafruit-circuit-playground-express).

Copy&nbsp; **code.py** &nbsp;from the link below and put it in&nbsp; **CIRCUITPY** &nbsp;root directory. You can work with this code in any text editing application, or open and save with&nbsp;[Mu](https://learn.adafruit.com/welcome-to-circuitpython/installing-mu-editor)&nbsp;if you prefer.&nbsp;

https://github.com/adafruit/Adafruit_Learning_System_Guides/blob/main/Grand_Central_Robot_Xylophone/code.py

The demonstration shows a simple scale and a short tune. You can use the play function to strike the various tones for a specified length of time then rest between notes. This allows you to do more complex melodies.

Have fun with your new musical instrument!

![](https://cdn-learn.adafruit.com/assets/assets/000/070/535/medium800thumb/robotics___cnc_Robot_xylophone.2019-01-22_18_22_56.jpg?1549072714)

## Troubleshooting

**Problem** : Grand Central M4 isn't recognized by Mu!

**Solution** : Make sure your board is set up with CircuitPython, which has the board show up as a flash drive named&nbsp; **CIRCUITPY** &nbsp;when you connect it to your computer. If it is showing up as&nbsp; **GCM4BOOT** &nbsp;on your computer, you can&nbsp;[follow the steps in this guide](https://learn.adafruit.com/adafruit-grand-central/circuitpython)&nbsp;to ensure CircuitPython is loaded and you see the&nbsp; **CIRCUITPY** &nbsp;drive.


## Guide Products

### Adafruit Grand Central M4 Express featuring the SAMD51

[Adafruit Grand Central M4 Express featuring the SAMD51](https://www.adafruit.com/product/4064)
Are you ready? Really ready? Cause here comes the **Adafruit Grand Central** featuring the **Microchip ATSAMD51**. This dev board is so big, it's not named after a Metro train, it's a whole freakin' _station_!

This board is like a freight...

In Stock
[Buy Now](https://www.adafruit.com/product/4064)
[Related Guides to the Product](https://learn.adafruit.com/products/4064/guides)
### Mega protoshield for Arduino

[Mega protoshield for Arduino](https://www.adafruit.com/product/192)
This is an extra large proto-shield, specifically designed for the Mega! It comes with PCB, two buttons and a full set of stacking headers. You can stack this shield easily since it comes with extra long female headers  
  
The kit includes:  
&nbsp;

- 1 x MEGAshield...

No Longer Stocked
[Buy Now](https://www.adafruit.com/product/192)
[Related Guides to the Product](https://learn.adafruit.com/products/192/guides)
### Mini Push-Pull Solenoid - 5V

[Mini Push-Pull Solenoid - 5V](https://www.adafruit.com/product/2776)
Solenoids are basically electromagnets: they are made of a coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull (from one end) or push (from the other).

This...

In Stock
[Buy Now](https://www.adafruit.com/product/2776)
[Related Guides to the Product](https://learn.adafruit.com/products/2776/guides)
### N-channel power MOSFET

[N-channel power MOSFET](https://www.adafruit.com/product/355)
When you need to switch a lot of power, N-channel MOSFETs are best for the job. These FETs can switch over 60A and 30V and are TO-220 packages so they fit nicely into any breadboard or perfboard. Heat sinking is easy with TO-220's, but because of the very low Rds(on) of down to 0.009 ohms...

Out of Stock
[Buy Now](https://www.adafruit.com/product/355)
[Related Guides to the Product](https://learn.adafruit.com/products/355/guides)
### 1N4001 Diode - 10 pack

[1N4001 Diode - 10 pack](https://www.adafruit.com/product/755)
This here is a 10 pack of the classic 1N4001 power blocking diode. These are good for reverse polarity protection (put it between your DC power jack and circuitry to avoid a negative-voltage that would zap your delicate electronics), kickback protection (place across your solenoids, relays...

Out of Stock
[Buy Now](https://www.adafruit.com/product/755)
[Related Guides to the Product](https://learn.adafruit.com/products/755/guides)
### 5V 2A (2000mA) switching power supply - UL Listed

[5V 2A (2000mA) switching power supply - UL Listed](https://www.adafruit.com/product/276)
This is an FCC/CE certified and UL listed power supply. Need a lot of 5V power? This switching supply gives a clean regulated 5V output at up to 2000mA. 110 or 240 input, so it works in any country. The plugs are "US 2-prong" style so you may need a plug adapter, but you can pick one...

In Stock
[Buy Now](https://www.adafruit.com/product/276)
[Related Guides to the Product](https://learn.adafruit.com/products/276/guides)
### USB cable - USB A to Micro-B

[USB cable - USB A to Micro-B](https://www.adafruit.com/product/592)
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or microcontroller

Approximately 3 feet / 1 meter long

Out of Stock
[Buy Now](https://www.adafruit.com/product/592)
[Related Guides to the Product](https://learn.adafruit.com/products/592/guides)
### Premium Male/Male Jumper Wires - 20 x 3" (75mm)

[Premium Male/Male Jumper Wires - 20 x 3" (75mm)](https://www.adafruit.com/product/1956)
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 20 (2&nbsp;pieces of each of ten rainbow colors). They have 0.1" male header contacts on either end and fit cleanly next to each...

In Stock
[Buy Now](https://www.adafruit.com/product/1956)
[Related Guides to the Product](https://learn.adafruit.com/products/1956/guides)

## Related Guides

- [Introducing the Adafruit Grand Central M4 Express](https://learn.adafruit.com/adafruit-grand-central.md)
- [Four Seasons Fairy Bottle Lanterns](https://learn.adafruit.com/four-seasons-fairy-bottle-lanterns.md)
- [DIY Robotic Sky Tracking Astrophotography Mount with CircuitPython](https://learn.adafruit.com/diy-robotic-sky-tracking-astrophotography-mount.md)
- [LED Trampoline](https://learn.adafruit.com/led-trampoline.md)
- [Remote Control Tree Ornament with Circuit Playground Express](https://learn.adafruit.com/remote-control-tree-ornament-with-circuit-playground-express.md)
- [LED Harness Bra](https://learn.adafruit.com/neopixel-led-harness-bra.md)
- [Not A Typewriter](https://learn.adafruit.com/not-a-typewriter.md)
- [Magical Cardboard Craft Obsidian Sword](https://learn.adafruit.com/cardboard-obsidian-sword.md)
- [3D Printed Starro Face Mask](https://learn.adafruit.com/3d-printed-starro-face-mask.md)
- [The MonkMakes Plant Monitor and CircuitPython](https://learn.adafruit.com/monkmakes-plant-monitor-and-circuitpython.md)
- [Crawling Baby Sea Turtle Robot](https://learn.adafruit.com/baby-turtle-makecode.md)
- [Adafruit Audio FX Sound Board](https://learn.adafruit.com/adafruit-audio-fx-sound-board.md)
- [Sailor Moon Star Locket](https://learn.adafruit.com/sailor-moon-star-locket.md)
- [CLUE case](https://learn.adafruit.com/clue-case.md)
- [Garden Path Lights with WLED and a Sunset Timer](https://learn.adafruit.com/garden-path-lights-with-sunset-timer.md)
- [Make a Zelda Master Sword with the RP2040 Prop-Maker Feather](https://learn.adafruit.com/master-sword-rp2040.md)
