Circuit Diagram

This provides a visual reference for wiring of the components. They aren't true to scale, just meant to be used as reference. This diagrams was created using Fritzing software.

Take a moment to review the components in the circuit diagram. This illustration is meant for referencing wired connections - The length of wire, position and size of components are not exact.


DC in Servo Brody: 

Connect your two motor wires to the Motor 1 connectors. For now it does not matter which color wire goes in which Motor 1 slot. We used Male to Male jumper wires to connect to the Motor terminal on the Crickit, these were then connected to the Female connector on the DC motor in Servo Body. 

UV NeoPixel Strip:

The UV NeoPixel strip connects to the NeoPixel terminal on the Crickit. Din on the NeoPixel strip connects to the arrow icon on the terminal on the Crickit. GND connects to GND and 5V to 5V.

This guide was first published on Apr 17, 2019. It was last updated on Mar 08, 2024.

This page (Circuit Diagram) was last updated on Mar 08, 2024.

Text editor powered by tinymce.