The RGB Matrix Dreidel Game uses some 3D printed parts to complete the build. All of the parts can print without supports.

It consists of three parts:

  • matrixDreidel_roof
  • matrixDreidel_legs
  • matrixDreidel_bucket

The files can be downloaded directly here or through Thingiverse.

The roof mounts to the top of the RGB matrix and has mounts for the breakbeam sensor. The sensors are placed on either side of the chocolate coin slot.

The legs mount to the bottom of the RGB matrix and allow it to stand up freely. Additionally, it has mounts for the servo motor and the STEMMA speaker.

The bucket attaches to the servo motor horn and will catch the chocolate coins as they're dropped in through the slot at the top.

This guide was first published on Nov 16, 2021. It was last updated on 2021-11-16 19:10:21 -0500.

This page (3D Printing) was last updated on Nov 28, 2021.

Text editor powered by tinymce.