If you have a Metro M4 AirLift, you can build this project easily - you just need an RGB Matrix shield to help connect!

You will need a Metro M4 Airlift, matrix shield and matrix

Adafruit Metro M4 Airlift Lite dev board with SAMD51 an ESP32 Wifi Co-processor.
Give your next project a lift with AirLift - our witty name for the ESP32 co-processor that graces this Metro M4. You already know about the Adafruit Metro...
Out of Stock
Adafruit RGB Matrix Shield for Arduino connected to a LED Matrix that reads "Adafruit Industries LED MATIX! 32x64 *RGB*"
Our RGB matricies are dazzling, with their hundreds or even thousands of individual RGB LEDs. Compared to NeoPixels, they've got great density, power usage and the...
$5.95
In Stock
Vide of assembled and powered on 64x32 RGB LED Matrix Panel - 4mm pitch. The matrix displays "Black Lives Matter" alongside the Raised Fist.
Bring a little bit of Times Square into your home with this sweet 64 x 32 square RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them...
$39.95
In Stock

This guide was first published on Aug 11, 2020. It was last updated on Aug 11, 2020.

This page (Using M4 Airlift) was last updated on Dec 25, 2021.

Text editor powered by tinymce.