Video of a person rotating an LED matrix. The animation resembles falling colored sand.
Wintertime can be rough in the city. The sky is gray. The weather is unpredictable. So slough off those seasonal blues with some Times Square razzle dazzle from this...
$49.95
In Stock
Angled Front Shot of the 64x64 RGB LED Matrix.
Wintertime can be rough in the city. The sky is gray. The weather is unpredictable. So slough off those seasonal blues with some Times Square razzle dazzle from this...
Out of Stock
Still image of a Adafruit RGB Matrix Bonnet powering a Matrix.
You can now create a dazzling display with your Raspberry Pi with the Adafruit RGB Matrix Bonnet. These boards plug into your Pi and make it...
guides with product
$14.95
In Stock
Angled shot of Raspberry Pi 4
The Raspberry Pi 4 Model B is the newest Raspberry Pi computer made, and the Pi Foundation knows you can always make a good thing
Out of Stock
Top down view of a Adafruit LIS3DH Triple-Axis Accelerometer.
The LIS3DH is a very popular low power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in...
guides with product
$4.95
In Stock
solid brass Power Distribution Bus
Imagine terminal blocks that are cut out of one solid piece of brass, designed to distribute power. Well, that's what we have here! These machined bus bars are for when you want to...
$1.95
In Stock
Top view of JST SH 4-pin to Premium Male Headers Cable next to US quarter for scale.
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared with the...
Out of Stock
Angled shot of a black woven USB cable plugged into a laptop port and a small dev board.
As technology changes and adapts, so does Adafruit, and speaking of adapting, check this Right Angle Black...
$3.50
In Stock
Black Nylon Screw and Stand-off Set with M2.5 Threads, kit box
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker...
guides with product
$16.95
In Stock
Opened box showing many nylon screws
Totaling 420 pieces, this M3 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel...
$16.95
In Stock
Third Hand Magnifier with two alligator grabbers and Magnifying Glass
The classic 'third hand tool,' as seen on every desk! We have one next to our Panavise jr, they complement each other well. This...
Out of Stock