
At the Feather M0's heart is an ATSAMD21G18 ARM Cortex M0+ processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new
guides with product
$19.95
In Stock

Standard HD44780 LCDs are useful for creating standalone projects.16 characters wide, 2 rowsWhite text on blue backgroundConnection port is 0.1"...
$9.95
In Stock

Make your own little LED strip arrangement with this stick of NeoPixel LEDs. We crammed 8 of the tiny 5050 (5mm x 5mm) smart RGB LEDs onto a PCB with mounting holes and a chainable...
guides with product
$5.95
In Stock

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a log taper 10K ohm potentiometer, with a grippy shaft. It's smooth and easy to...
$0.95
In Stock

Need some really bright LEDs? We are big fans of these clear red LEDs, in fact we use them exclusively in our kits. They are very bright and have about 20degree LED beam. They go...
$8.00
In Stock

Need some really bright LEDs? We are big fans of these clear blue LEDs, in fact we use them exclusively in our kits. They are very bright and have about 20degree LED beam. They go...
$8.00
In Stock

Need some really bright LEDs? We are big fans of these clear green LEDs, in fact we use them exclusively in our kits. They are very bright and have about 20degree LED beam. They go...
$8.00
In Stock

Keep your 5mm LEDs in place with these little plastic LED holders. These are handy for projects using individual LEDs...
$0.95
In Stock

Oh say can you seeBy the knob's early light...Sorry - we thought that was clever. And while it wasn't really, this potentiometer knob...
$0.50
In Stock

Oh say can you seeBy the knob's early light...Sorry - we thought that...
$0.50
In Stock

Oh say can you seeBy the knob's early light...Sorry - we thought that...
$0.50
In Stock

Customers have asked us to carry basic perf-board, but we never liked the look of most basic perf: it's always crummy quality, with pads that flake off and no labeling. Then we...
guides with product
$4.50
In Stock

Perfect for bread-boarding, free wiring, etc. This box contains 6 spools of solid-core wire. The wire is easy to solder to and when bent it keeps its shape pretty well. We like to have...
$15.95
In Stock

Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker...
guides with product
$16.95
In Stock

Having a 3D printer without filament is sort of like having a regular printer without paper or ink. And while a lot of printers come with some filament there's a good chance...
No Longer Stocked

Having a 3D printer without filament is sort of like having a regular printer without paper or ink. And while a lot of printers come with some filament there's a good chance...
No Longer Stocked