Rezz-Inspired NeoPixel Glasses

by Ruiz Brothers

published January 01, 2020, last edited January 22, 2025

posted in LEDs/ LED Pixels 3D Printing CircuitPython

Save Download

26

Intermediate

Project guide

Install Battery

Connect Battery

Plug in the 400mAh battery to the JST port on the Trinket/ItsyBitsy Lipo Backpack. Orient the battery so it's matching the photo. Place the battery into the enclosure.

Install Cover

Place the battery cover over the case on the left arm. Insert the cover at an angle so one side is lined up with the groves on the edge. Firmly press together to snap fit into place.

Page last edited March 08, 2024

Text editor powered by tinymce.

Search