Lipo Battery Arm
The rezz-arm-bat.stl and rezz-bat-box.stl parts are attached together with super glue. Use the mounting holes to line up the parts. Reference the top and bottom photos to get the correct placement.
ItsyBitsy Arm
The rezz-arm-itsy.stl and rezz-itsy-box.stl parts are attached together with super glue. Use the mounting holes to line up the parts. Reference the top and bottom photos to get the correct placement.
Connect Arms to Frame
The two arms are attached to the frame. Press the hinges from the arms into the knuckles on the sides of the frame.
Installing Hinges
Press the hinge and knuckles together so that the 2mm diameter hole is visible through out the hinge. Use a M2 threading tool to tap threads into the plastic.
Installed Arms
Install both arms into the frames. Double check the orientation of the arms and wear them to test fit and verify the parts are installed correctly.
Install Screw
Insert a M2 x 12mm machine screw through the top of the hinges. Fasten the screw until it's installed all the way through the hinge.
Secured Arms
Ensure the screw is installed as straight as possible through the hinge. Using a tapping tool to create threads into the hinges makes this much easier.
Page last edited March 08, 2024
Text editor powered by tinymce.