Add Bluetooth® capability to your computer super fast with a Xinghuatian Tech Bluetooth® 4.0 USB Module. This adapter is backwards compatible with v2.1 and earlier, but also supports the latest v4.0/ Bluetooth® Low Energy. Inside lies a

Didn't think the Raspberry Pi could get any better? You're in for a big surprise! The Raspberry Pi 2 Model B is out and it's amazing! With an upgraded ARM Cortex-A53 quad-core processor, Dual Core VideoCore IV Multimedia coprocessor, and a full Gigabyte of RAM, this...

OMG OMG OMG, did you hear? There's a Raspberry Pi called the Model B+ and check it out...more USB ports, more GPIO, better power supply, four mounting holes, less sticky-out SD card! Yep, that's right, the fantastic engineers at Raspberry Pi HQ have blessed us with a new design....

Note: As of August 10th, 2016 the Raspberry Pi A+ now includes 512 MB of RAM!The Raspberry Pi Model A+ is the perfect board for the minimalist Pi fan. This low-cost Pi uses the same processor as the model B+, but does away with the Ethernet jack and three of the USB...

You're interested in what all this BLE stuff is about, anyways? Let Adafruit's lead Engineer, Kevin "KTOWN" Townsend (a.k.a "50 Ohm") guide you in this detailed tome. KTOWN teamed up with Akiba (a.k.a "Wireless EL blinky guy") to throw down all their...

The Bluefruit LE Friend is your new Bluetooth® Low Energy BFF! This USB-to-Bluetooth® Low Energy board makes it easy to get your computer talking to your Bluetooth® Low Energy-enabled phone or tablet using a standard serial/UART connection.In its simplest form, it works...

Discontinued - you can grab SEGGER J-Link EDU Mini - JTAG/SWD Debugger instead! The SEGGER J-Link EDU is identical to the more expensive J-Link BASE model except...

The SEGGER J-Link BASE is identical to the cheaper J-Link EDU model except for the terms of use.If you're going to use your debugger strictly for personal, non-commercial projects, such as publishing...

This adapter board is designed for adapting a 'classic' 2x10 (0.1"/2.54mm pitch) JTAG cable to a slimmer 2x5 (0.05"/1.27mm pitch) SWD Cable.  It's helpful for using products like the JTAGulator or

These little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming connectors. We see these connectors often on ARM Cortex dev kits, and have a few handy in our ARM-dev box. We thought you may want a backup cable as well, so now...