An assembled Raspberry Pi Arcade Cabinet Pack.
Couldn't get one of those Nintendo Mini Classic consoles? No problem, we've got you covered with this no-solder no-tools required kit! Video games are one of...
$59.95
In Stock
Angled shot of Raspberry Pi 3 - Model B.
NOTE: Due to stock limitations we may only be able to offer refunds or store credit for Pis that are defective, damaged or lost in transit.Did you really...
Out of Stock
Angled shot of Raspberry Pi Zero computer
NOTE: Due to stock limitations we may only be able to offer refunds or store credit for Pis that are defective, damaged or lost in transit.At first glance,...
Out of Stock
Hand removing/installing micro SD card from SD adapter
Add mega-storage in a jiffy using this 8 GB class 4 micro-SD card. It comes with a SD adapter so you can use it with any of our shields or adapters. Preformatted to FAT so it works out...
$9.95
In Stock
Small Arcade Joystick with red ball
This snappy 8-way joystick beckons you to play with it! It is rugged, and not too large, reminiscent of a Pac Man arcade cabinet. Unlike the potentiometer-based 2-axis and mini...
$14.95
In Stock
Angled shot of a pink translucent round 30mm arcade button.
A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. They're the same size as common arcade controls (often referred to...
$5.95
In Stock
Angled shot of a translucent red round 30mm arcade button.
A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. They're the same size as common arcade controls (often referred to...
$5.95
In Stock
Angled shot of a translucent yellow round 30mm arcade button.
A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. They're the same size as common arcade controls (often referred to...
$5.95
In Stock
Angled shot of a clear round 30mm arcade button.
A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. They're the same size as common arcade controls (often referred to...
$5.95
In Stock
Angled shot of a translucent green round 30mm arcade button.
A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. They're the same size as common arcade controls (often referred to...
$5.95
In Stock
Angled shot of a translucent blue round 30mm arcade button.
A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. They're the same size as common arcade controls (often referred to...
$5.95
In Stock
head-on shot of illuminated large white arcade button with LED.
BAM! This 60mm diameter arcade button is large and inviting and ready for all sorts of pressing and pushing. We've seen these on some games of skill in arcades, they're easy to...
Out of Stock
Head-on shot of illuminated massive white 100mm arcade button.
OMG WATCH OUT! This 100mm diameter arcade button with a 10mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which...
$9.95
In Stock
Premium Female/Female Jumper Wires - 40 x 12" (300mm)
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces of each of...
$7.95
In Stock
Angled shot of ten 20 cm long quick-connect wire pairs.
Quick connector wire sets will make wiring up our arcade-style or metal buttons quicky-quick. Each wire comes as a 'pair' with two 0.11" quick-connects pre-crimped onto...
$4.95
In Stock
USB cable - USB A to Micro-B - 3 foot long
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or...
$2.95
In Stock
Wall wart power supply with 2 US prong power
Need a USB jack for charging or powering a project, but don't want to lug around a computer? This switching supply gives a clean regulated output at up to 1000mA! 110 or 240 input,...
$5.95
In Stock
Angled shot of Adafruit Perma-Proto HAT for Pi Mini Kit on a Raspberry Pi.
Design your own Pi HAT, attach custom circuitry and otherwise dress your Pi Zero, A+, B+, Pi 2, Pi 3 and Pi 4 (any Pi with a 2x20 connector) with this jaunty prototyping HAT...
$4.95
In Stock
Angled shot of PiGRRL 2.0 Custom Gamepad PCB
This is the Custom Gamepad PCB for the PiGRRL 2 pack! The board is designed for use in portable gaming projects...
$4.95
In Stock
Angle shot PiGrrl Zero Custom Gamepad PCB
This is the custom Gamepad PCB for the PiGRRL Zero Parts...
$2.50
In Stock
Angled shot of 10 8mm soft tactile buttons.
Put your project in stealth mode with these silent Soft Tactile Switch Buttons. Tactile switches are standard input...
$1.95
In Stock