# Remote Control with the Huzzah + Adafruit.io

## Overview

![](https://cdn-learn.adafruit.com/assets/assets/000/028/040/medium800thumb/adafruit_products_HUZZAH-Remote-LED.jpg?1448322597)

This guide will show you how to send button press data to Adafruit IO from the HUZZAH ESP8266, then&nbsp;use that data to change the color of an LED connected to a second HUZZAH ESP8266.

If you haven't worked your way through the Adafruit IO feed and dashboard basics guides, you should do that before continuing with this guide so you have a basic understanding of Adafruit IO.

- [Adafruit IO Basics: Feeds](../../../adafruit-io-basics-feeds)
- [Adafruit IO Basics: Dashboards](../../../adafruit-io-basics-dashboards)

You should also go&nbsp;through the setup guide associated with&nbsp;the&nbsp;HUZZAH ESP8266 for use with the Arduino IDE.

- [Adafruit HUZZAH ESP8266 Setup Guide](../../../adafruit-huzzah-esp8266-breakout/using-arduino-ide)

If you have completed&nbsp;all of the prerequisites listed above, you are now ready to move on to the&nbsp;Adafruit IO setup steps.

Let's get started!

- [Next Page](https://learn.adafruit.com/remote-control-with-the-huzzah-plus-adafruit-io/adafruit-io-setup.md)

## Featured Products

### Adafruit HUZZAH ESP8266 Breakout

[Adafruit HUZZAH ESP8266 Breakout](https://www.adafruit.com/product/2471)
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip...

In Stock
[Buy Now](https://www.adafruit.com/product/2471)
[Related Guides to the Product](https://learn.adafruit.com/products/2471/guides)
### FTDI Serial TTL-232 USB Cable

[FTDI Serial TTL-232 USB Cable](https://www.adafruit.com/product/70)
Just about all electronics use TTL serial for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. This is a USB to TTL serial cable, with a FTDI FT232RL usb/serial chip embedded in the head. It has a 6-pin socket at the end...

In Stock
[Buy Now](https://www.adafruit.com/product/70)
[Related Guides to the Product](https://learn.adafruit.com/products/70/guides)
### Colorful 12mm Square Tactile Button Switch Assortment - 15 pack

[Colorful 12mm Square Tactile Button Switch Assortment - 15 pack](https://www.adafruit.com/product/1010)
Little clicky switches are standard input "buttons" on electronic projects. These work best in a PCB but [can be used on a solderless breadboard as shown in this tutorial](http://www.ladyada.net/learn/arduino/lesson5.html). The pins are normally open (disconnected) and...

In Stock
[Buy Now](https://www.adafruit.com/product/1010)
[Related Guides to the Product](https://learn.adafruit.com/products/1010/guides)
### Colorful Round Tactile Button Switch Assortment - 15 pack

[Colorful Round Tactile Button Switch Assortment - 15 pack](https://www.adafruit.com/product/1009)
Little clicky switches are standard input "buttons" on electronic projects. These work best in a PCB but [can be used on a solderless breadboard as shown in this tutorial](http://www.ladyada.net/learn/arduino/lesson5.html). The pins are normally open (disconnected) and...

In Stock
[Buy Now](https://www.adafruit.com/product/1009)
[Related Guides to the Product](https://learn.adafruit.com/products/1009/guides)
### Tactile Button switch (6mm) x 20 pack

[Tactile Button switch (6mm) x 20 pack](https://www.adafruit.com/product/367)
Little clicky switches are standard input "buttons" on electronic projects. These work best in a PCB but [can be used on a solderless breadboard as shown in this tutorial](https://learn.adafruit.com/adafruit-arduino-lesson-6-digital-inputs?view=all). The pins are normally...

In Stock
[Buy Now](https://www.adafruit.com/product/367)
[Related Guides to the Product](https://learn.adafruit.com/products/367/guides)
### Diffused RGB (tri-color) 10mm LED (10 pack)

[Diffused RGB (tri-color) 10mm LED (10 pack)](https://www.adafruit.com/product/848)
Make some beautiful colors with these diffused 10mm tri-color LED with separate red, green and blue LED chips inside! They make a nice indicator, and fun to color-swirl. We like diffused RGB LEDs because they color mix inside instead of appearing as 3 distinct LEDs.  
  
These are...

In Stock
[Buy Now](https://www.adafruit.com/product/848)
[Related Guides to the Product](https://learn.adafruit.com/products/848/guides)
### Premium Male/Male Jumper Wires - 40 x 3" (75mm)

[Premium Male/Male Jumper Wires - 40 x 3" (75mm)](https://www.adafruit.com/product/759)
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male header contacts on either end and fit cleanly next to each other...

In Stock
[Buy Now](https://www.adafruit.com/product/759)
[Related Guides to the Product](https://learn.adafruit.com/products/759/guides)
### Half Sized Premium Breadboard - 400 Tie Points

[Half Sized Premium Breadboard - 400 Tie Points](https://www.adafruit.com/product/64)
This is a cute, half-size breadboard with&nbsp;400 tie points, good for small projects. It's 3.25" x 2.2" / 8.3cm&nbsp;x 5.5cm&nbsp;with a standard double-strip in the middle and two power rails on both sides.&nbsp;You can pull the power rails off easily to make the breadboard as...

In Stock
[Buy Now](https://www.adafruit.com/product/64)
[Related Guides to the Product](https://learn.adafruit.com/products/64/guides)

## Related Guides

- [All the Internet of Things - Episode Two: Protocols](https://learn.adafruit.com/alltheiot-protocols.md)
- [Huzzah Weather Display](https://learn.adafruit.com/huzzah-weather-display.md)
- [MicroPython Hardware: I2C Devices](https://learn.adafruit.com/micropython-hardware-i2c-devices.md)
- [Smart Toilet Light](https://learn.adafruit.com/smart-toilet-light.md)
- [Pro Trinket as a USB HID Mouse](https://learn.adafruit.com/pro-trinket-usb-hid-mouse.md)
- [Ninja Timer: Giant 7-Segment Display](https://learn.adafruit.com/ninja-timer-giant-7-segment-display.md)
- [MicroPython Hardware: SPI Devices](https://learn.adafruit.com/micropython-hardware-spi-devices.md)
- [UV Brush Cleaner](https://learn.adafruit.com/uv-brush-cleaner.md)
- [MicroPython Basics: What is MicroPython?](https://learn.adafruit.com/micropython-basics-what-is-micropython.md)
- [Unicorn Hat with Moving Ears](https://learn.adafruit.com/unicorn-hat-with-moving-ears.md)
- [Adding a WiFi Co-Processor to CircuitPython](https://learn.adafruit.com/adding-a-wifi-co-processor-to-circuitpython-esp8266-esp32.md)
- [MicroPython Basics: Blink a LED](https://learn.adafruit.com/micropython-basics-blink-a-led.md)
- [Breadboards for Beginners](https://learn.adafruit.com/breadboards-for-beginners.md)
- [Level Shifting 3.3V microcontrollers and NeoPixels](https://learn.adafruit.com/neopixel-levelshifter.md)
- [Collin's Lab: Breadboards & Perfboards](https://learn.adafruit.com/collins-lab-breadboards-and-perfboards.md)
