Teaching the Raspberry Pi how to read analog inputs is easier than you think! The Pi does not include a hardware analog-to-digital converter, but an external ADC (such as the MCP3008) can be used, along with some SPI code in Python to read external analog devices.

Here is a short list of some analog inputs that could be used with this setup:

This guide uses a potentiometer to control the volume of an audio tone, but the code can be used as the basis for any kind of analog-input project.

This guide was first published on Jul 29, 2012. It was last updated on Jul 29, 2012.

This page (Overview) was last updated on Feb 26, 2021.

Text editor powered by tinymce.